AS568-240 O-Ring Size

O-Ring Sizes (AS568) · -201 to -284: 0.139 in (3.53 mm) cross-section

The AS568-240 O-ring has an inside diameter of 3.734 in (94.84 mm) and a cross-section of 0.139 in (3.53 mm), so its outside diameter is 4.012 in (101.90 mm). Cross-section tolerance is ± 0.004 in (0.10 mm). The same size is sold as 2-240 (Parker), BS 1806 and ISO 3601-1 inch size 240, in any compound.

IDInside diameter
94.84 mm3.734 in3.734 in94.84 mm
CSCross-section
3.53 mm0.139 in0.139 in3.53 mm
ODOutside diameter (ref.)
101.90 mm4.012 in4.012 in101.90 mm

Drawing

OD 101.90 mmOD 4.012 inID 94.84 mmID 3.734 in
CS 3.53 mmCS 0.139 in± 0.10 mm± 0.004 inCord cross-section (enlarged)
Top view to scale; cross-section enlarged.Proportions shown, not to scale · Dimensions in mmDimensions in inches

AS568-240 specifications

IDInside diameter3.734 in94.84 mm
CSCross-section0.139 in3.53 mm
ODOutside diameter (ref.)4.012 in101.90 mm
CS tolerance (±)0.004 in0.10 mm

Also known as

-2402-240AS568A-240AS568B-240#240

Same inside diameter, other cross-sections

All AS568 O-ring sizes

Compare all 349 AS568 sizes in the chart →

Sources

  1. SAE AS568F: Aerospace size standard for O-rings
  2. Parker O-Ring Handbook ORD 5700: AS568 size table
  3. Apple Rubber: Standard AS568 size O-rings
  4. Global O-Ring and Seal: AS568 O-ring size chart

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.