AS568-284 O-Ring Size

O-Ring Sizes (AS568) · -201 to -284: 0.139 in (3.53 mm) cross-section

The AS568-284 O-ring has an inside diameter of 17.955 in (456.06 mm) and a cross-section of 0.139 in (3.53 mm), so its outside diameter is 18.233 in (463.12 mm). Cross-section tolerance is ± 0.004 in (0.10 mm). The same size is sold as 2-284 (Parker), BS 1806 and ISO 3601-1 inch size 284, in any compound.

IDInside diameter
456.06 mm17.955 in17.955 in456.06 mm
CSCross-section
3.53 mm0.139 in0.139 in3.53 mm
ODOutside diameter (ref.)
463.12 mm18.233 in18.233 in463.12 mm

Drawing

OD 463.12 mmOD 18.233 inID 456.06 mmID 17.955 in
CS 3.53 mmCS 0.139 in± 0.10 mm± 0.004 inCord cross-section (enlarged)
Top view to scale; cross-section enlarged.Proportions shown, not to scale · Dimensions in mmDimensions in inches

AS568-284 specifications

IDInside diameter17.955 in456.06 mm
CSCross-section0.139 in3.53 mm
ODOutside diameter (ref.)18.233 in463.12 mm
CS tolerance (±)0.004 in0.10 mm

Also known as

-2842-284AS568A-284AS568B-284#284

Same inside diameter, other cross-sections

All AS568 O-ring sizes

Compare all 349 AS568 sizes in the chart →

Sources

  1. SAE AS568F: Aerospace size standard for O-rings
  2. Parker O-Ring Handbook ORD 5700: AS568 size table
  3. Apple Rubber: Standard AS568 size O-rings
  4. Global O-Ring and Seal: AS568 O-ring size chart

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.