AS568-341 O-Ring Size

O-Ring Sizes (AS568) · -309 to -395: 0.210 in (5.33 mm) cross-section

The AS568-341 O-ring has an inside diameter of 3.475 in (88.27 mm) and a cross-section of 0.210 in (5.33 mm), so its outside diameter is 3.895 in (98.93 mm). Cross-section tolerance is ± 0.005 in (0.13 mm). The same size is sold as 2-341 (Parker), BS 1806 and ISO 3601-1 inch size 341, in any compound.

IDInside diameter
88.27 mm3.475 in3.475 in88.27 mm
CSCross-section
5.33 mm0.210 in0.210 in5.33 mm
ODOutside diameter (ref.)
98.93 mm3.895 in3.895 in98.93 mm

Drawing

OD 98.93 mmOD 3.895 inID 88.27 mmID 3.475 in
CS 5.33 mmCS 0.210 in± 0.13 mm± 0.005 inCord cross-section (enlarged)
Top view to scale; cross-section enlarged.Proportions shown, not to scale · Dimensions in mmDimensions in inches

AS568-341 specifications

IDInside diameter3.475 in88.27 mm
CSCross-section0.210 in5.33 mm
ODOutside diameter (ref.)3.895 in98.93 mm
CS tolerance (±)0.005 in0.13 mm

Also known as

-3412-341AS568A-341AS568B-341#341

Same inside diameter, other cross-sections

All AS568 O-ring sizes

Compare all 349 AS568 sizes in the chart →

Sources

  1. SAE AS568F: Aerospace size standard for O-rings
  2. Parker O-Ring Handbook ORD 5700: AS568 size table
  3. Apple Rubber: Standard AS568 size O-rings
  4. Global O-Ring and Seal: AS568 O-ring size chart

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.