AS568-345 O-Ring Size
O-Ring Sizes (AS568) · -309 to -395: 0.210 in (5.33 mm) cross-section
The AS568-345 O-ring has an inside diameter of 3.975 in (100.97 mm) and a cross-section of 0.210 in (5.33 mm), so its outside diameter is 4.395 in (111.63 mm). Cross-section tolerance is ± 0.005 in (0.13 mm). The same size is sold as 2-345 (Parker), BS 1806 and ISO 3601-1 inch size 345, in any compound.
- IDInside diameter
- 100.97 mm3.975 in3.975 in100.97 mm
- CSCross-section
- 5.33 mm0.210 in0.210 in5.33 mm
- ODOutside diameter (ref.)
- 111.63 mm4.395 in4.395 in111.63 mm
Drawing
AS568-345 specifications
| IDInside diameter | 3.975 in100.97 mm |
|---|---|
| CSCross-section | 0.210 in5.33 mm |
| ODOutside diameter (ref.) | 4.395 in111.63 mm |
| CS tolerance (±) | 0.005 in0.13 mm |
Also known as
-3452-345AS568A-345AS568B-345#345
Same inside diameter, other cross-sections
All AS568 O-ring sizes
Sources
- SAE AS568F: Aerospace size standard for O-rings
- Parker O-Ring Handbook ORD 5700: AS568 size table
- Apple Rubber: Standard AS568 size O-rings
- Global O-Ring and Seal: AS568 O-ring size chart
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.