AS568-350 O-Ring Size

O-Ring Sizes (AS568) · -309 to -395: 0.210 in (5.33 mm) cross-section

The AS568-350 O-ring has an inside diameter of 4.600 in (116.84 mm) and a cross-section of 0.210 in (5.33 mm), so its outside diameter is 5.020 in (127.51 mm). Cross-section tolerance is ± 0.005 in (0.13 mm). The same size is sold as 2-350 (Parker), BS 1806 and ISO 3601-1 inch size 350, in any compound.

IDInside diameter
116.84 mm4.600 in4.600 in116.84 mm
CSCross-section
5.33 mm0.210 in0.210 in5.33 mm
ODOutside diameter (ref.)
127.51 mm5.020 in5.020 in127.51 mm

Drawing

OD 127.51 mmOD 5.020 inID 116.84 mmID 4.600 in
CS 5.33 mmCS 0.210 in± 0.13 mm± 0.005 inCord cross-section (enlarged)
Top view to scale; cross-section enlarged.Proportions shown, not to scale · Dimensions in mmDimensions in inches

AS568-350 specifications

IDInside diameter4.600 in116.84 mm
CSCross-section0.210 in5.33 mm
ODOutside diameter (ref.)5.020 in127.51 mm
CS tolerance (±)0.005 in0.13 mm

Also known as

-3502-350AS568A-350AS568B-350#350

Same inside diameter, other cross-sections

All AS568 O-ring sizes

Compare all 349 AS568 sizes in the chart →

Sources

  1. SAE AS568F: Aerospace size standard for O-rings
  2. Parker O-Ring Handbook ORD 5700: AS568 size table
  3. Apple Rubber: Standard AS568 size O-rings
  4. Global O-Ring and Seal: AS568 O-ring size chart

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.