AS568-364 O-Ring Size

O-Ring Sizes (AS568) · -309 to -395: 0.210 in (5.33 mm) cross-section

The AS568-364 O-ring has an inside diameter of 6.725 in (170.82 mm) and a cross-section of 0.210 in (5.33 mm), so its outside diameter is 7.145 in (181.48 mm). Cross-section tolerance is ± 0.005 in (0.13 mm). The same size is sold as 2-364 (Parker), BS 1806 and ISO 3601-1 inch size 364, in any compound.

IDInside diameter
170.82 mm6.725 in6.725 in170.82 mm
CSCross-section
5.33 mm0.210 in0.210 in5.33 mm
ODOutside diameter (ref.)
181.48 mm7.145 in7.145 in181.48 mm

Drawing

OD 181.48 mmOD 7.145 inID 170.82 mmID 6.725 in
CS 5.33 mmCS 0.210 in± 0.13 mm± 0.005 inCord cross-section (enlarged)
Top view to scale; cross-section enlarged.Proportions shown, not to scale · Dimensions in mmDimensions in inches

AS568-364 specifications

IDInside diameter6.725 in170.82 mm
CSCross-section0.210 in5.33 mm
ODOutside diameter (ref.)7.145 in181.48 mm
CS tolerance (±)0.005 in0.13 mm

Also known as

-3642-364AS568A-364AS568B-364#364

Same inside diameter, other cross-sections

All AS568 O-ring sizes

Compare all 349 AS568 sizes in the chart →

Sources

  1. SAE AS568F: Aerospace size standard for O-rings
  2. Parker O-Ring Handbook ORD 5700: AS568 size table
  3. Apple Rubber: Standard AS568 size O-rings
  4. Global O-Ring and Seal: AS568 O-ring size chart

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.