AS568-376 O-Ring Size

O-Ring Sizes (AS568) · -309 to -395: 0.210 in (5.33 mm) cross-section

The AS568-376 O-ring has an inside diameter of 9.725 in (247.02 mm) and a cross-section of 0.210 in (5.33 mm), so its outside diameter is 10.145 in (257.68 mm). Cross-section tolerance is ± 0.005 in (0.13 mm). The same size is sold as 2-376 (Parker), BS 1806 and ISO 3601-1 inch size 376, in any compound.

IDInside diameter
247.02 mm9.725 in9.725 in247.02 mm
CSCross-section
5.33 mm0.210 in0.210 in5.33 mm
ODOutside diameter (ref.)
257.68 mm10.145 in10.145 in257.68 mm

Drawing

OD 257.68 mmOD 10.145 inID 247.02 mmID 9.725 in
CS 5.33 mmCS 0.210 in± 0.13 mm± 0.005 inCord cross-section (enlarged)
Top view to scale; cross-section enlarged.Proportions shown, not to scale · Dimensions in mmDimensions in inches

AS568-376 specifications

IDInside diameter9.725 in247.02 mm
CSCross-section0.210 in5.33 mm
ODOutside diameter (ref.)10.145 in257.68 mm
CS tolerance (±)0.005 in0.13 mm

Also known as

-3762-376AS568A-376AS568B-376#376

Same inside diameter, other cross-sections

All AS568 O-ring sizes

Compare all 349 AS568 sizes in the chart →

Sources

  1. SAE AS568F: Aerospace size standard for O-rings
  2. Parker O-Ring Handbook ORD 5700: AS568 size table
  3. Apple Rubber: Standard AS568 size O-rings
  4. Global O-Ring and Seal: AS568 O-ring size chart

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.