AS568-434 O-Ring Size

O-Ring Sizes (AS568) · -425 to -475: 0.275 in (6.99 mm) cross-section

The AS568-434 O-ring has an inside diameter of 5.600 in (142.24 mm) and a cross-section of 0.275 in (6.98 mm), so its outside diameter is 6.150 in (156.21 mm). Cross-section tolerance is ± 0.006 in (0.15 mm). The same size is sold as 2-434 (Parker), BS 1806 and ISO 3601-1 inch size 434, in any compound.

IDInside diameter
142.24 mm5.600 in5.600 in142.24 mm
CSCross-section
6.98 mm0.275 in0.275 in6.98 mm
ODOutside diameter (ref.)
156.21 mm6.150 in6.150 in156.21 mm

Drawing

OD 156.21 mmOD 6.150 inID 142.24 mmID 5.600 in
CS 6.98 mmCS 0.275 in± 0.15 mm± 0.006 inCord cross-section (enlarged)
Top view to scale; cross-section enlarged.Proportions shown, not to scale · Dimensions in mmDimensions in inches

AS568-434 specifications

IDInside diameter5.600 in142.24 mm
CSCross-section0.275 in6.98 mm
ODOutside diameter (ref.)6.150 in156.21 mm
CS tolerance (±)0.006 in0.15 mm

Also known as

-4342-434AS568A-434AS568B-434#434

Same inside diameter, other cross-sections

All AS568 O-ring sizes

Compare all 349 AS568 sizes in the chart →

Sources

  1. SAE AS568F: Aerospace size standard for O-rings
  2. Parker O-Ring Handbook ORD 5700: AS568 size table
  3. Apple Rubber: Standard AS568 size O-rings
  4. Global O-Ring and Seal: AS568 O-ring size chart

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.