AS568-461 O-Ring Size

O-Ring Sizes (AS568) · -425 to -475: 0.275 in (6.99 mm) cross-section

The AS568-461 O-ring has an inside diameter of 15.955 in (405.26 mm) and a cross-section of 0.275 in (6.98 mm), so its outside diameter is 16.505 in (419.23 mm). Cross-section tolerance is ± 0.006 in (0.15 mm). The same size is sold as 2-461 (Parker), BS 1806 and ISO 3601-1 inch size 461, in any compound.

IDInside diameter
405.26 mm15.955 in15.955 in405.26 mm
CSCross-section
6.98 mm0.275 in0.275 in6.98 mm
ODOutside diameter (ref.)
419.23 mm16.505 in16.505 in419.23 mm

Drawing

OD 419.23 mmOD 16.505 inID 405.26 mmID 15.955 in
CS 6.98 mmCS 0.275 in± 0.15 mm± 0.006 inCord cross-section (enlarged)
Top view to scale; cross-section enlarged.Proportions shown, not to scale · Dimensions in mmDimensions in inches

AS568-461 specifications

IDInside diameter15.955 in405.26 mm
CSCross-section0.275 in6.98 mm
ODOutside diameter (ref.)16.505 in419.23 mm
CS tolerance (±)0.006 in0.15 mm

Also known as

-4612-461AS568A-461AS568B-461#461

Same inside diameter, other cross-sections

All AS568 O-ring sizes

Compare all 349 AS568 sizes in the chart →

Sources

  1. SAE AS568F: Aerospace size standard for O-rings
  2. Parker O-Ring Handbook ORD 5700: AS568 size table
  3. Apple Rubber: Standard AS568 size O-rings
  4. Global O-Ring and Seal: AS568 O-ring size chart

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.