AS568-466 O-Ring Size

O-Ring Sizes (AS568) · -425 to -475: 0.275 in (6.99 mm) cross-section

The AS568-466 O-ring has an inside diameter of 18.455 in (468.76 mm) and a cross-section of 0.275 in (6.98 mm), so its outside diameter is 19.005 in (482.73 mm). Cross-section tolerance is ± 0.006 in (0.15 mm). The same size is sold as 2-466 (Parker), BS 1806 and ISO 3601-1 inch size 466, in any compound.

IDInside diameter
468.76 mm18.455 in18.455 in468.76 mm
CSCross-section
6.98 mm0.275 in0.275 in6.98 mm
ODOutside diameter (ref.)
482.73 mm19.005 in19.005 in482.73 mm

Drawing

OD 482.73 mmOD 19.005 inID 468.76 mmID 18.455 in
CS 6.98 mmCS 0.275 in± 0.15 mm± 0.006 inCord cross-section (enlarged)
Top view to scale; cross-section enlarged.Proportions shown, not to scale · Dimensions in mmDimensions in inches

AS568-466 specifications

IDInside diameter18.455 in468.76 mm
CSCross-section0.275 in6.98 mm
ODOutside diameter (ref.)19.005 in482.73 mm
CS tolerance (±)0.006 in0.15 mm

Also known as

-4662-466AS568A-466AS568B-466#466

All AS568 O-ring sizes

Compare all 349 AS568 sizes in the chart →

Sources

  1. SAE AS568F: Aerospace size standard for O-rings
  2. Parker O-Ring Handbook ORD 5700: AS568 size table
  3. Apple Rubber: Standard AS568 size O-rings
  4. Global O-Ring and Seal: AS568 O-ring size chart

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.