400 m Running Track Dimensions and Lane Distances

A standard 400 m track has two 84.39 m straights joined by semicircles of 36.50 m radius, with lanes 1.22 m wide. Only lane 1 is 400 m: one lap in lane 8 is 453.03 m, which is why 400 m runners start 53.03 m apart.

9 sizesChecked 2026-11-153 sources
infieldstraight 84.39 mfinish400 m startsr 36.50 m
lane 1lane 8finish━ 400 m ┅ 200 m
Eight lanes of 1.22 m, to scale; the second drawing enlarges the first bend. Solid orange ticks are the 400 m starts, dashed ticks the 200 m starts; runners go anticlockwise.Drawn to scale

Size chartSort by any column, or filter to find a row

9 of 9
LanerRadius of the running linemftOne lapmft400 m staggermft200 m staggermft
Lane 136.80120.7400.001312.30.000.00.000.0
Lane 237.92124.4407.041335.47.0423.13.5211.5
Lane 339.14128.4414.701360.614.7048.27.3524.1
Lane 440.36132.4422.371385.722.3773.411.1836.7
Lane 541.58136.4430.031410.930.0398.515.0249.3
Lane 642.80140.4437.701436.037.70123.718.8561.8
Lane 744.02144.4445.371461.245.36148.822.6874.4
Lane 845.24148.4453.031486.353.03174.026.5287.0
Lane 946.46152.4460.701511.560.70199.130.3599.6

How lane distances are measured

The distance is measured along an imaginary running line, not along the kerb. In lane 1 that line is 0.30 m outside the kerb, so its radius is 36.80 m and one lap is exactly 400.00 m (2 × 84.39 m + 2π × 36.80 m). In every other lane it is 0.20 m outside the inner lane line.

Each lane is 1.22 m wide including the 5 cm line on its right. Moving out one lane adds 1.22 m to the radius, so each bend gets π × 1.22 ≈ 3.83 m longer and a full lap 7.67 m longer. Lane 2 is the exception, at 7.04 m more, because its running line is only 0.20 m from its inner line.

Staggers put the outer lanes ahead so everyone runs the same distance to the finish line: the 400 m stagger covers two bends, the 200 m stagger one bend. For the 800 m runners stay in lanes for the first bend only and then cut in at the break line; that stagger has an extra correction and is not shown.

About Running Tracks

The chart applies to the World Athletics 'standard track', the shape almost every modern 400 m track uses. Older or tight sites sometimes use double-bend tracks with two radii; their lane lengths are close but staggers differ, so check the track's own marking plan.

The whole track with eight lanes measures about 176.9 m × 92.5 m to the outside of lane 8, before run-offs, the steeplechase water jump and the field-event areas. A full-size soccer pitch (105 × 68 m) fits inside the infield.

For training, remember that a lap in lane 4 is 422.4 m and in lane 8 it is 453 m. Four laps in lane 8 are 1,812 m instead of 1,600 m. The calculator gives the distance for any lane and number of laps.

Track geometry

Standard 400 m track per World Athletics:

ItemValue
Radius to the kerb36.50 m
Straights84.39 m each
Lane width1.22 m ± 0.01 m (incl. one 50 mm line)
Running line, lane 10.30 m outside the kerb (raised kerb): 400.00 m per lap
Running line, lanes 2–80.20 m outside the inner lane line
Lanes8 for major international competition; some tracks have 9
Overall, 8 lanesabout 176.9 × 92.5 m

Questions

How long is lane 8 on a 400 m track?

453.03 m per lap, 53.03 m more than lane 1. That is why the 400 m start in lane 8 is 53.03 m ahead of lane 1.

How many laps of a track is a mile?

4.02 laps in lane 1 (1,609.34 m). Four laps in lane 1 are 1,600 m, 9.34 m short of a mile; the mile start line is therefore 9.34 m behind the finish line.

How wide is a running track lane?

1.22 m (4 ft) including the 5 cm line on its outer side, with a tolerance of ±1 cm.

What is the radius of a 400 m track?

36.50 m to the inside of the kerb. The running line in lane 1 is 0.30 m further out, at 36.80 m, which makes the lap exactly 400 m with 84.39 m straights.

What is the stagger for the 200 m?

Half of the 400 m stagger because only one bend is run in lanes: 3.52 m for lane 2, 11.18 m for lane 4 and 26.52 m for lane 8.

Sources

  1. World Athletics: Track and Field Facilities Manual (400 m standard track, marking plan)
  2. World Athletics: Technical Rules, Rule 14 (lane width, measurement of the running line)
  3. Government of Western Australia: Sports Dimensions Guide: athletics track events (cross-check)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.