M8×6.2 Beam Dimensions & Properties

S & M Shapes (AISC) · M shapes: miscellaneous light beams

M8×6.2 is an AISC M shapes: miscellaneous light beams shape. It is 8 in (203.2 mm) deep with a 2.28 in (57.9 mm) flange, a 0.129 in (3.3 mm) web and an average flange thickness of 0.177 in (4.5 mm), and weighs 6.2 lb/ft (9.2 kg/m). Area 1.82 in² (1,174 mm²); Ix = 17.6 in⁴ (732.6 cm⁴), Sx = 4.39 in³ (71.9 cm³), Zx = 5.15 in³ (84.4 cm³).

dDepth
203.2 mm8 in8 in203.2 mm
bfFlange width
57.9 mm2.28 in2.28 in57.9 mm
twWeb thickness
3.3 mm0.129 in0.129 in3.3 mm
tfFlange thickness
4.5 mm0.177 in0.177 in4.5 mm

Drawing

57.9 mm2.28 in203.2 mm8 intf 4.5 mmtf 0.177 intw 3.3 mmtw 0.129 ink 11.1 mmk 0.438 in
Drawn to scale · Dimensions in mmDimensions in inches

M8×6.2 specifications

dDepth8 in203.2 mm
bfFlange width2.28 in57.9 mm
twWeb thickness0.129 in3.3 mm
tfFlange thickness0.177 in4.5 mm
kDesign value0.438 in11.1 mm
kDetailing value7/16 in11.1 mm
k1Detailing value1/4 in6.4 mm
WWeight6.2 lb/ft9.2 kg/m
AArea1.82 in²1,174 mm²
IxMoment of inertia, strong axis17.6 in⁴732.6 cm⁴
ZxPlastic modulus, strong axis5.15 in³84.4 cm³
SxSection modulus, strong axis4.39 in³71.9 cm³
rxRadius of gyration, strong axis3.1 in78.7 mm
IyMoment of inertia, weak axis0.352 in⁴14.7 cm⁴
ZyPlastic modulus, weak axis0.495 in³8.1 cm³
SySection modulus, weak axis0.308 in³5 cm³
ryRadius of gyration, weak axis0.44 in11.2 mm
JTorsional constant0.016 in⁴0.65 cm⁴
bf/2tfFlange slenderness6.44
h/twWeb slenderness56.5

Shapes of about the same weight in other depths

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.