S10×25.4 Beam Dimensions & Properties

S & M Shapes (AISC) · S shapes: American Standard beams

S10×25.4 is an AISC S shapes: American Standard beams shape. It is 10 in (254.0 mm) deep with a 4.66 in (118.4 mm) flange, a 0.311 in (7.9 mm) web and an average flange thickness of 0.491 in (12.5 mm), and weighs 25.4 lb/ft (37.8 kg/m). Area 7.45 in² (4,806 mm²); Ix = 123 in⁴ (5,119.6 cm⁴), Sx = 24.6 in³ (403.1 cm³), Zx = 28.3 in³ (463.8 cm³).

dDepth
254.0 mm10 in10 in254.0 mm
bfFlange width
118.4 mm4.66 in4.66 in118.4 mm
twWeb thickness
7.9 mm0.311 in0.311 in7.9 mm
tfFlange thickness
12.5 mm0.491 in0.491 in12.5 mm

Drawing

118.4 mm4.66 in254.0 mm10 intf 12.5 mmtf 0.491 intw 7.9 mmtw 0.311 ink 28.7 mmk 1.13 in
Drawn to scale · Dimensions in mmDimensions in inches

S10×25.4 specifications

dDepth10 in254.0 mm
bfFlange width4.66 in118.4 mm
twWeb thickness0.311 in7.9 mm
tfFlange thickness0.491 in12.5 mm
kDesign value1.13 in28.7 mm
kDetailing value1 1/8 in28.6 mm
WWeight25.4 lb/ft37.8 kg/m
AArea7.45 in²4,806 mm²
IxMoment of inertia, strong axis123 in⁴5,119.6 cm⁴
ZxPlastic modulus, strong axis28.3 in³463.8 cm³
SxSection modulus, strong axis24.6 in³403.1 cm³
rxRadius of gyration, strong axis4.07 in103.4 mm
IyMoment of inertia, weak axis6.73 in⁴280.1 cm⁴
ZyPlastic modulus, weak axis4.99 in³81.8 cm³
SySection modulus, weak axis2.89 in³47.4 cm³
ryRadius of gyration, weak axis0.95 in24.1 mm
JTorsional constant0.603 in⁴25.1 cm⁴
bf/2tfFlange slenderness4.75
h/twWeb slenderness25.6
Metric designationS250×37.8

Also known as

S250×37.8

All S & M Shapes (AISC) sizes

Compare all 44 shapes in the S & M Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.