Netball Court Dimensions

Sports Courts · Volleyball, handball, futsal, netball, ice hockey

Netball Court: 30.5 m (100.07 ft) long and 15.25 m (50.03 ft) wide. The plan is drawn to scale and the table lists the markings.

LCourt length
30.5 m100.07 ft100.07 ft30.5 m
WCourt width
15.25 m50.03 ft50.03 ft15.25 m
Rim / ring height
3.05 m10 ft10 ft3.05 m

Drawing

30.5 m100.07 ft15.25 m50.03 ft
Plan view.Drawn to scale

Netball Court specifications

LCourt length30.5 m100.07 ft
WCourt width15.25 m50.03 ft
Court area465 m²5,006 ft²
Rim / ring height3.05 m10 ft

Markings: Netball Court

MarkingSize
Court30.5 m × 15.25 m (100 ft × 50 ft), divided into thirds
Goal circlesemicircle of 4.9 m (16 ft) radius
Centre circle0.9 m (3 ft) diameter
Goal post3.05 m (10 ft) to the top of the ring
Run-off3.05 m recommended on all sides

All Sports Courts sizes

Compare all 17 sizes in the Sports Courts chart →

Sources

  1. NBA: Official Playing Rules, Rule 1: Court Dimensions, Equipment
  2. FIBA: Official Basketball Rules 2024, Rule Two: Court and Equipment
  3. NCAA: Men's and Women's Basketball Rules, Rule 1
  4. NFHS: Basketball Rules Book, Rule 1 (court diagram)
  5. ITF: Rules of Tennis, Rule 1 The Court; Appendix (run-off)
  6. BWF: Laws of Badminton, Law 1 Court and Court Equipment
  7. FIVB: Official Volleyball Rules and Official Beach Volleyball Rules, Rule 1
  8. USA Pickleball: Official Rulebook, Section 2: Court and Equipment
  9. World Squash: Specifications for squash courts
  10. USA Racquetball: Official Rules, Rule 2: Courts and Equipment
  11. IHF: Rules of the Game (Indoor Handball), Rule 1 The Playing Court
  12. FIFA: Futsal Laws of the Game, Law 1 The Pitch
  13. World Netball: Rules of Netball; Netball Australia court and venue specifications
  14. FIP: Padel Rules (court dimensions)
  15. ITTF: Handbook, Laws of Table Tennis and playing conditions
  16. NHL: Official Rules, Section 1: Rink
  17. Government of Western Australia: Sports Dimensions Guide (cross-check)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.