Squash Court Dimensions
Sports Courts · Racket and paddle sports
Squash Court: 9.75 m (31.99 ft) long and 6.4 m (21 ft) wide. The plan is drawn to scale; the table lists every line and the net height.
- LCourt length
- 9.75 m31.99 ft31.99 ft9.75 m
- WCourt width
- 6.4 m21 ft21 ft6.4 m
Drawing
Squash Court specifications
| LCourt length | 9.75 m31.99 ft |
|---|---|
| WCourt width | 6.4 m21 ft |
| Court area | 62 m²672 ft² |
| Clear height / wall height | 5.64 m18.5 ft |
Markings: Squash Court
| Marking | Size |
|---|---|
| Floor | 9.75 m × 6.40 m (32 ft × 21 ft), ±10 mm |
| Short line | 5.44 m from the front wall |
| Service boxes | 1.60 m square |
| Front wall out line | 4.57 m above the floor |
| Service line (front wall) | 1.78 m |
| Tin | top at 0.48 m |
| Back wall out line | 2.13 m |
| Clear height | at least 5.64 m |
The court is a closed box: the out lines run on the front, side and back walls, the tin is the 'net' at the bottom of the front wall.
All Sports Courts sizes
Sources
- NBA: Official Playing Rules, Rule 1: Court Dimensions, Equipment
- FIBA: Official Basketball Rules 2024, Rule Two: Court and Equipment
- NCAA: Men's and Women's Basketball Rules, Rule 1
- NFHS: Basketball Rules Book, Rule 1 (court diagram)
- ITF: Rules of Tennis, Rule 1 The Court; Appendix (run-off)
- BWF: Laws of Badminton, Law 1 Court and Court Equipment
- FIVB: Official Volleyball Rules and Official Beach Volleyball Rules, Rule 1
- USA Pickleball: Official Rulebook, Section 2: Court and Equipment
- World Squash: Specifications for squash courts
- USA Racquetball: Official Rules, Rule 2: Courts and Equipment
- IHF: Rules of the Game (Indoor Handball), Rule 1 The Playing Court
- FIFA: Futsal Laws of the Game, Law 1 The Pitch
- World Netball: Rules of Netball; Netball Australia court and venue specifications
- FIP: Padel Rules (court dimensions)
- ITTF: Handbook, Laws of Table Tennis and playing conditions
- NHL: Official Rules, Section 1: Rink
- Government of Western Australia: Sports Dimensions Guide (cross-check)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.