MLB Baseball Field Dimensions
Sports Fields · Baseball and softball
MLB Baseball Field: bases 90 ft (27.43 m) apart and a pitching distance of 60.5 ft (18.44 m). The plan is to scale; the table lists the other key distances.
- Base path
- 27.43 m90 ft90 ft27.43 m
- Pitching distance
- 18.44 m60.5 ft60.5 ft18.44 m
- Fence at the foul lines (min.)
- 99.1 m325 ft325 ft99.1 m
Drawing
MLB Baseball Field specifications
| Base path | 27.43 m90 ft |
|---|---|
| Pitching distance | 18.44 m60.5 ft |
| Fence at the foul lines (min.) | 99.1 m325 ft |
| Fence in centre field (min.) | 121.9 m400 ft |
Markings: MLB Baseball Field
| Marking | Size |
|---|---|
| Base paths | 90 ft square |
| Pitcher's plate to home plate (rear point) | 60 ft 6 in |
| Home plate to second base | 127 ft 3⅜ in |
| Pitcher's mound | 18 ft diameter, plate 10 in above home plate |
| Pitcher's plate (rubber) | 24 in × 6 in |
| Bases | 18 in square (MLB since 2023) |
| Home plate | 17 in wide |
| Fences (parks built after 1 June 1958) | at least 325 ft down the foul lines and 400 ft to centre field |
All Sports Fields sizes
Sources
- IFAB: Laws of the Game, Law 1: The Field of Play
- NFL: Official Playing Rules, Rule 1: The Field
- NCAA: Football Rules and Interpretations, Rule 1
- NFHS: Football Rules Book, Rule 1 (field diagram)
- CFL: rule and field changes announced 22 Sept 2025 (effective 2027)
- World Rugby: Laws of the Game, Law 1: The Ground
- RFL: Match Day Operations 2026 (pitch dimensions); International Rugby League Laws of the Game
- AFL: Measure out and line mark an Australian Rules oval
- MCC: Laws of Cricket, Laws 6 and 7; ICC playing conditions, clause 19 (boundaries)
- MLB: Official Baseball Rules, Rule 2.01 and field diagrams
- FIH: Rules of Hockey, Playing Area
- USA Lacrosse: How to line a men's field (2026)
- Government of Western Australia: Sports Dimensions Guide (cross-check for rugby, AFL, Gaelic, hockey, lacrosse, softball)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.