32005 X Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 320 X series (extra light, wide)
The 32005 X is a tapered roller bearing (320 X series, extra light, wide): 25 mm (0.9843 in) bore, 47 mm (1.8504 in) outside diameter and 15 mm (0.5906 in) total width. The cone is 15 mm (0.5906 in) wide and the cup 11.5 mm (0.4528 in).
- dBore diameter
- 25 mm0.9843 in0.9843 in25 mm
- DOutside diameter
- 47 mm1.8504 in1.8504 in47 mm
- TTotal width
- 15 mm0.5906 in0.5906 in15 mm
Drawing
32005 X specifications
| dBore diameter | 25 mm0.9843 in |
|---|---|
| DOutside diameter | 47 mm1.8504 in |
| TTotal width | 15 mm0.5906 in |
| BCone width | 15 mm0.5906 in |
| CCup width | 11.5 mm0.4528 in |
The 320 X series is narrower in the cup than the cone (C < B = T): 32005 X has a 15 mm cone and an 11.5 mm cup.
Also known as
HR32005XJ4T-32005X32005-X-XL32005JR32005J2/QHR32005J4T-3200532005-A32005-XL32005U
Other tapered roller bearings with a 25 mm bore
Same 25 mm bore in other bearing types
6205Ball Bearings6305Ball Bearings6005Ball Bearings7005Angular Contact Bearings7205Angular Contact Bearings3205Angular Contact BearingsNU205Cylindrical Roller BearingsNU305Cylindrical Roller BearingsNU2205Cylindrical Roller Bearings22205Spherical Roller Bearings21305Spherical Roller Bearings1205Self-Aligning Ball Bearings1305Self-Aligning Ball Bearings2205Self-Aligning Ball Bearings51105Thrust Ball Bearings51205Thrust Ball Bearings51305Thrust Ball BearingsNA4905Needle Roller BearingsUC205Bearing Units (UCP, UCF, UCFL)
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.