48 ft dry van Dimensions
Trailers & Trucks · US tractor-trailers
A 48 ft dry van measures about 48.2 ft (14.68 m) × 98–100 in (2489–2540 mm) × 108–110 in (2743–2794 mm) inside (length × width × height). It holds 28 GMA 48 × 40 pallets on the floor and a typical payload of 43,000–45,000 lb (19,504–20,412 kg).
- LInside length (load length)
- 14.68 m48.2 ft48.2 ft14.68 m
- WInside width
- 2489–2540 mm98–100 in98–100 in2489–2540 mm
- HInside height
- 2743–2794 mm108–110 in108–110 in2743–2794 mm
- GMA 48 × 40 pallets (1 tier)
- 28
Drawing
48 ft dry van specifications
| LInside length (load length) | 14.68 m48.2 ft |
|---|---|
| WInside width | 2489–2540 mm98–100 in |
| HInside height | 2743–2794 mm108–110 in |
| Payload (typical) | 19,504–20,412 kg43,000–45,000 lb |
| GMA 48 × 40 pallets (1 tier) | 28 |
| EUR 1200 × 800 pallets (1 tier) | 36 |
| Outside / notes | 48 ft × 102 in × 13 ft 6 in |
Straight-loaded a 48 ft van takes 24 GMA pallets (12 rows of two); turned, 28.
Other equipment in this group
All Trailers & Trucks sizes
Sources
- FHWA: Federal size regulations for commercial motor vehicles (23 CFR 658: 102 in width, 80,000 lb, 48/53 ft trailers)
- Council Directive 96/53/EC (as amended by Directive (EU) 2015/719): maximum dimensions and weights in the EU
- Utility Trailer: 4000D-X dry van specifications (inside width and height)
- Wabash: DuraPlate dry van and reefer specifications
- Schmitz Cargobull: S.CS curtainsider and S.KO reefer semi-trailer data
- Hale Trailer: Interior and exterior dimensions of a 53 foot trailer (dry van and reefer)
- Penske Truck Rental: 16 foot box truck specifications
- U-Haul: 26 ft truck interior dimensions and max load
- Wikipedia (de): Megatrailer (13.60 × 2.48 × 3.00 m inside)
- Condor Ferries: Trailer types (EU trailer inside dimensions, volume, weight, pallets)
- Hale Trailer: Step deck vs. flatbed trailer
- Hale Trailer: Dry van maximum cargo weight
- Repackify: Freight equipment dimensions (48 / 53 ft vans)
- Mercer Transportation: How many pallets fit in a truck (carrier equipment guide)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.