3204 Angular Contact Bearing Dimensions
Angular Contact Bearings · 32 series, double row, light (US 52xx)
The 3204 is an angular contact ball bearing (32 series, double row, light, US 52xx). It has a 20 mm (0.787 in) bore, a 47 mm (1.850 in) outside diameter and is 20.6 mm (0.811 in) wide. Contact angle: 25°–35° (by maker). The boundary dimensions are the same for every brand and every suffix.
- dBore diameter
- 20 mm0.787 in0.787 in20 mm
- DOutside diameter
- 47 mm1.850 in1.850 in47 mm
- BWidth
- 20.6 mm0.811 in0.811 in20.6 mm
Drawing
3204 specifications
| dBore diameter | 20 mm0.787 in |
|---|---|
| DOutside diameter | 47 mm1.850 in |
| BWidth | 20.6 mm0.811 in |
| αContact angle | 25°–35° (by maker) |
Also known as
3204A3204-2RS3204-2Z3204A-2RS13204A-2Z3204ATN93204-BD3204-B-2RSR3204-B-2Z3204J3204B3204S52045204-2RS5204-ZZ
Other angular contact bearings with a 20 mm bore
Same 20 mm bore in other bearing types
6004Ball Bearings6204Ball Bearings6304Ball Bearings30204Tapered Roller Bearings30304Tapered Roller Bearings32004 XTapered Roller BearingsNU204Cylindrical Roller BearingsNU304Cylindrical Roller BearingsNU2204Cylindrical Roller Bearings21304Spherical Roller Bearings1204Self-Aligning Ball Bearings2204Self-Aligning Ball Bearings1304Self-Aligning Ball Bearings51104Thrust Ball Bearings51204Thrust Ball Bearings51304Thrust Ball BearingsNA4904Needle Roller BearingsUC204Bearing Units (UCP, UCF, UCFL)
All Angular Contact Bearings sizes
Compare all 103 sizes in the Angular Contact Bearings chart →
Sources
- ISO 15:2017, Rolling bearings, radial bearings, boundary dimensions, general plan
- DIN 628-1 / DIN 628-3: Angular contact ball bearings, single row and double row
- SKF: Angular contact ball bearings, product tables (72 BE, 73 BE, 32 A, 33 A)
- Schaeffler (FAG) medias: 72-B, 73-B, 32-B, 33-B angular contact ball bearings
- NSK: Rolling bearings catalogue (CAT. E1102), angular contact ball bearings
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.