Angular Contact Ball Bearing Size Chart

Angular contact ball bearings carry combined radial and axial load in one direction (single row) or both directions (double row). A 7204 has exactly the same 20 × 47 × 14 mm envelope as a 6204. The series digit and bore code work the same way; only the internal geometry differs.

103 sizesChecked 2026-11-155 sources
Shaft ⌀50 mm701080×16721090×207310110×27321090×30.23310110×44.4
Same 50 mm shaft: 7010, 7210, 7310 single row and 3210, 3310 double row (upper half sections).Drawn to scale · Dimensions in mmDimensions in inches

Size chartTap a size for its drawing and full specs

103 of 103
BearingdBore diametermminDOutside diametermminBWidthmminαContact angle
70 series, extra light (C 15° / AC 25°)
7000100.394261.02480.31515° (C) / 25° (AC)
7001120.472281.10280.31515° (C) / 25° (AC)
7002150.591321.26090.35415° (C) / 25° (AC)
7003170.669351.378100.39415° (C) / 25° (AC)
7004200.787421.654120.47215° (C) / 25° (AC)
7005250.984471.850120.47215° (C) / 25° (AC)
7006301.181552.165130.51215° (C) / 25° (AC)
7007351.378622.441140.55115° (C) / 25° (AC)
7008401.575682.677150.59115° (C) / 25° (AC)
7009451.772752.953160.63015° (C) / 25° (AC)
7010501.969803.150160.63015° (C) / 25° (AC)
7011552.165903.543180.70915° (C) / 25° (AC)
7012602.362953.740180.70915° (C) / 25° (AC)
7013652.5591003.937180.70915° (C) / 25° (AC)
7014702.7561104.331200.78715° (C) / 25° (AC)
7015752.9531154.528200.78715° (C) / 25° (AC)
7016803.1501254.921220.86615° (C) / 25° (AC)
7017853.3461305.118220.86615° (C) / 25° (AC)
7018903.5431405.512240.94515° (C) / 25° (AC)
7019953.7401455.709240.94515° (C) / 25° (AC)
70201003.9371505.906240.94515° (C) / 25° (AC)
72 series, light (B 40°)
7200100.394301.18190.35440° (B)
7201120.472321.260100.39440° (B)
7202150.591351.378110.43340° (B)
7203170.669401.575120.47240° (B)
7204200.787471.850140.55140° (B)
7205250.984522.047150.59140° (B)
7206301.181622.441160.63040° (B)
7207351.378722.835170.66940° (B)
7208401.575803.150180.70940° (B)
7209451.772853.346190.74840° (B)
7210501.969903.543200.78740° (B)
7211552.1651003.937210.82740° (B)
7212602.3621104.331220.86640° (B)
7213652.5591204.724230.90640° (B)
7214702.7561254.921240.94540° (B)
7215752.9531305.118250.98440° (B)
7216803.1501405.512261.02440° (B)
7217853.3461505.906281.10240° (B)
7218903.5431606.299301.18140° (B)
7219953.7401706.693321.26040° (B)
72201003.9371807.087341.33940° (B)
73 series, medium (B 40°)
7300100.394351.378110.43340° (B)
7301120.472371.457120.47240° (B)
7302150.591421.654130.51240° (B)
7303170.669471.850140.55140° (B)
7304200.787522.047150.59140° (B)
7305250.984622.441170.66940° (B)
7306301.181722.835190.74840° (B)
7307351.378803.150210.82740° (B)
7308401.575903.543230.90640° (B)
7309451.7721003.937250.98440° (B)
7310501.9691104.331271.06340° (B)
7311552.1651204.724291.14240° (B)
7312602.3621305.118311.22040° (B)
7313652.5591405.512331.29940° (B)
7314702.7561505.906351.37840° (B)
7315752.9531606.299371.45740° (B)
7316803.1501706.693391.53540° (B)
7317853.3461807.087411.61440° (B)
7318903.5431907.480431.69340° (B)
7319953.7402007.874451.77240° (B)
73201003.9372158.465471.85040° (B)
32 series, double row, light (US 52xx)
3200100.394301.18114.30.56325°–35° (by maker)
3201120.472321.26015.90.62625°–35° (by maker)
3202150.591351.37815.90.62625°–35° (by maker)
3203170.669401.57517.50.68925°–35° (by maker)
3204200.787471.85020.60.81125°–35° (by maker)
3205250.984522.04720.60.81125°–35° (by maker)
3206301.181622.44123.80.93725°–35° (by maker)
3207351.378722.835271.06325°–35° (by maker)
3208401.575803.15030.21.18925°–35° (by maker)
3209451.772853.34630.21.18925°–35° (by maker)
3210501.969903.54330.21.18925°–35° (by maker)
3211552.1651003.93733.31.31125°–35° (by maker)
3212602.3621104.33136.51.43725°–35° (by maker)
3213652.5591204.72438.11.50025°–35° (by maker)
3214702.7561254.92139.71.56325°–35° (by maker)
3215752.9531305.11841.31.62625°–35° (by maker)
3216803.1501405.51244.41.74825°–35° (by maker)
3217853.3461505.90649.21.93725°–35° (by maker)
3218903.5431606.29952.42.06325°–35° (by maker)
3219953.7401706.69355.62.18925°–35° (by maker)
32201003.9371807.08760.32.37425°–35° (by maker)
33 series, double row, medium (US 53xx)
3302150.591421.654190.74825°–35° (by maker)
3303170.669471.85022.20.87425°–35° (by maker)
3304200.787522.04722.20.87425°–35° (by maker)
3305250.984622.44125.41.00025°–35° (by maker)
3306301.181722.83530.21.18925°–35° (by maker)
3307351.378803.15034.91.37425°–35° (by maker)
3308401.575903.54336.51.43725°–35° (by maker)
3309451.7721003.93739.71.56325°–35° (by maker)
3310501.9691104.33144.41.74825°–35° (by maker)
3311552.1651204.72449.21.93725°–35° (by maker)
3312602.3621305.118542.12625°–35° (by maker)
3313652.5591405.51258.72.31125°–35° (by maker)
3314702.7561505.90663.52.50025°–35° (by maker)
3315752.9531606.29968.32.68925°–35° (by maker)
3316803.1501706.69368.32.68925°–35° (by maker)
3317853.3461807.087732.87425°–35° (by maker)
3318903.5431907.480732.87425°–35° (by maker)
3319953.7402007.87477.83.06325°–35° (by maker)
33201003.9372158.46582.63.25225°–35° (by maker)

How to read an angular contact bearing number

7206 BEP reads like a ball bearing number: 7 = single row angular contact, 2 = light dimension series (0 extra light, 3 medium), 06 = bore code (× 5 = 30 mm; 00/01/02/03 = 10/12/15/17 mm). The boundary dimensions are those of the 6206: 30 × 62 × 16 mm.

The first letter after the number is the contact angle: B = 40° (the standard for 72/73 series, best for axial load), AC = 25°, C = 15° (precision and high-speed spindles, 70 series). E means the reinforced modern design (SKF BE), P a glass-fibre polyamide cage, M a brass cage, Y a pressed brass cage, J a pressed steel cage.

Bearings meant for pairs carry an arrangement code: DB back-to-back (O, takes tilting moments), DF face-to-face (X, tolerates misalignment), DT tandem (both share load in one direction). Universally matchable bearings are marked CB, CA, CC (SKF) or UA, UB, UO (FAG/NSK) with the preload or clearance class. 2RZ / 2RS are seals. None of this changes d × D × B.

Double row bearings 32xx / 33xx (sold as 52xx / 53xx in the US) have their own, wider widths: 3205 is 25 × 52 × 20.6 mm. Suffix A (SKF) or B (FAG -BD) is the internal design; 2RS / 2Z are seals and shields, which fit within the same width.

About Angular Contact Bearings

In an angular contact bearing the raceways are offset along the axis, so the line through the two ball contacts is tilted by the contact angle α. That lets the bearing take a large axial load in one direction together with radial load. The larger α, the more axial load and the less speed: 40° for general machinery, 25° and 15° for machine-tool spindles.

A single row bearing takes axial load in one direction only, so it is always mounted against a second bearing: another angular contact bearing (adjusted pair), a deep groove ball bearing or a tapered roller bearing. The common choice is two universally matchable bearings mounted back-to-back (DB) on a pump or gearbox shaft.

The 70, 72 and 73 series use the ISO 15 envelopes of the 60, 62 and 63 deep groove ball bearings, so you can often swap a 62xx for a 72xx of the same bore without touching the housing, but only if the shaft arrangement adjusts the bearing axially. A loose angular contact bearing runs badly.

Double row bearings (32, 33) behave like a back-to-back pair in one ring set and take axial load in both directions plus tilting moments. Their widths come from inch-based sizes (14.3, 15.9, 20.6, 23.8 … mm) and are larger than any single row bearing of the same bore.

Contact angle by maker

Single row 72/73 B bearings are 40° at every maker. Double row 32/33 bearings differ: SKF 32 A / 33 A use 30°, FAG -BD and -B versions 25°, FAG -M versions (with filling slot) 35°, NTN about 32°. When replacing a double row bearing in a precision application, keep the same maker's version or check the angle.

Mounting single row bearings in pairs

Back-to-back (DB, "O"): the load lines spread outward, giving a stiff arrangement that resists tilting, normal for spindles and pump shafts. Face-to-face (DF, "X"): load lines meet inside, the pair tolerates some misalignment. Tandem (DT): both bearings share axial load in the same direction and need a third bearing for the reverse direction.

Questions

What size is a 7204 bearing?

A 7204 is 20 mm bore, 47 mm outside diameter and 14 mm wide (0.787 × 1.850 × 0.551 in), the same envelope as a 6204. 7204 B, BEP and BECBP all share these dimensions.

What is the difference between 7205 B, AC and C?

Only the contact angle: B = 40°, AC = 25°, C = 15°. The size (25 × 52 × 15 mm) is identical. 40° takes the most axial load; 15° and 25° run faster and are used in spindles.

Can I replace a 6205 with a 7205?

Dimensionally yes: both are 25 × 52 × 15 mm. Functionally only if the arrangement holds the 7205 axially against a second bearing; a single angular contact bearing takes axial load in one direction only.

Is a 5205 the same as a 3205?

Yes. 5200 / 5300 are the American designations of the 3200 / 3300 double row bearings: 5205 = 3205 = 25 × 52 × 20.6 mm.

What do DB, DF and DT mean?

They describe matched pairs of single row bearings: DB back-to-back (O, stiff against tilting), DF face-to-face (X, tolerates misalignment), DT tandem (both carry axial load in the same direction).

Sources

  1. ISO 15:2017, Rolling bearings, radial bearings, boundary dimensions, general plan
  2. DIN 628-1 / DIN 628-3: Angular contact ball bearings, single row and double row
  3. SKF: Angular contact ball bearings, product tables (72 BE, 73 BE, 32 A, 33 A)
  4. Schaeffler (FAG) medias: 72-B, 73-B, 32-B, 33-B angular contact ball bearings
  5. NSK: Rolling bearings catalogue (CAT. E1102), angular contact ball bearings

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.