3209 Angular Contact Bearing Dimensions
Angular Contact Bearings · 32 series, double row, light (US 52xx)
The 3209 is an angular contact ball bearing (32 series, double row, light, US 52xx). It has a 45 mm (1.772 in) bore, a 85 mm (3.346 in) outside diameter and is 30.2 mm (1.189 in) wide. Contact angle: 25°–35° (by maker). The boundary dimensions are the same for every brand and every suffix.
- dBore diameter
- 45 mm1.772 in1.772 in45 mm
- DOutside diameter
- 85 mm3.346 in3.346 in85 mm
- BWidth
- 30.2 mm1.189 in1.189 in30.2 mm
Drawing
3209 specifications
| dBore diameter | 45 mm1.772 in |
|---|---|
| DOutside diameter | 85 mm3.346 in |
| BWidth | 30.2 mm1.189 in |
| αContact angle | 25°–35° (by maker) |
Also known as
3209A3209-2RS3209-2Z3209A-2RS13209A-2Z3209ATN93209-BD3209-B-2RSR3209-B-2Z3209J3209B3209S52095209-2RS5209-ZZ
Other angular contact bearings with a 45 mm bore
Same 45 mm bore in other bearing types
6009Ball Bearings6209Ball Bearings6309Ball Bearings30209Tapered Roller Bearings30309Tapered Roller Bearings31309Tapered Roller BearingsNU209Cylindrical Roller BearingsNU309Cylindrical Roller BearingsNU2209Cylindrical Roller Bearings21309Spherical Roller Bearings22209Spherical Roller Bearings22309Spherical Roller Bearings1209Self-Aligning Ball Bearings1309Self-Aligning Ball Bearings2209Self-Aligning Ball Bearings51109Thrust Ball Bearings51209Thrust Ball Bearings51309Thrust Ball BearingsNA4909Needle Roller BearingsUC209Bearing Units (UCP, UCF, UCFL)
All Angular Contact Bearings sizes
Compare all 103 sizes in the Angular Contact Bearings chart →
Sources
- ISO 15:2017, Rolling bearings, radial bearings, boundary dimensions, general plan
- DIN 628-1 / DIN 628-3: Angular contact ball bearings, single row and double row
- SKF: Angular contact ball bearings, product tables (72 BE, 73 BE, 32 A, 33 A)
- Schaeffler (FAG) medias: 72-B, 73-B, 32-B, 33-B angular contact ball bearings
- NSK: Rolling bearings catalogue (CAT. E1102), angular contact ball bearings
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.