3318 Angular Contact Bearing Dimensions
Angular Contact Bearings · 33 series, double row, medium (US 53xx)
The 3318 is an angular contact ball bearing (33 series, double row, medium, US 53xx). It has a 90 mm (3.543 in) bore, a 190 mm (7.480 in) outside diameter and is 73 mm (2.874 in) wide. Contact angle: 25°–35° (by maker). The boundary dimensions are the same for every brand and every suffix.
- dBore diameter
- 90 mm3.543 in3.543 in90 mm
- DOutside diameter
- 190 mm7.480 in7.480 in190 mm
- BWidth
- 73 mm2.874 in2.874 in73 mm
Drawing
3318 specifications
| dBore diameter | 90 mm3.543 in |
|---|---|
| DOutside diameter | 190 mm7.480 in |
| BWidth | 73 mm2.874 in |
| αContact angle | 25°–35° (by maker) |
Also known as
3318A3318-2RS3318-2Z3318A-2RS13318A-2Z3318ATN93318-BD3318-B-2RSR3318-B-2Z3318J3318B3318S53185318-2RS5318-ZZ
Other angular contact bearings with a 90 mm bore
Same 90 mm bore in other bearing types
6018Ball Bearings6218Ball Bearings6318Ball Bearings30218Tapered Roller Bearings30318Tapered Roller Bearings31318Tapered Roller BearingsNU218Cylindrical Roller BearingsNU318Cylindrical Roller BearingsNU2218Cylindrical Roller Bearings22218Spherical Roller Bearings21318Spherical Roller Bearings22318Spherical Roller Bearings1218Self-Aligning Ball Bearings1318Self-Aligning Ball Bearings2218Self-Aligning Ball Bearings51118Thrust Ball Bearings51218Thrust Ball Bearings51318Thrust Ball BearingsNA4918Needle Roller BearingsUC218Bearing Units (UCP, UCF, UCFL)
All Angular Contact Bearings sizes
Compare all 103 sizes in the Angular Contact Bearings chart →
Sources
- ISO 15:2017, Rolling bearings, radial bearings, boundary dimensions, general plan
- DIN 628-1 / DIN 628-3: Angular contact ball bearings, single row and double row
- SKF: Angular contact ball bearings, product tables (72 BE, 73 BE, 32 A, 33 A)
- Schaeffler (FAG) medias: 72-B, 73-B, 32-B, 33-B angular contact ball bearings
- NSK: Rolling bearings catalogue (CAT. E1102), angular contact ball bearings
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.