7210 Angular Contact Bearing Dimensions
Angular Contact Bearings · 72 series, light (B 40°)
The 7210 is an angular contact ball bearing (72 series, light, B 40°). It has a 50 mm (1.969 in) bore, a 90 mm (3.543 in) outside diameter and is 20 mm (0.787 in) wide. Contact angle: 40° (B). The boundary dimensions are the same for every brand and every suffix.
- dBore diameter
- 50 mm1.969 in1.969 in50 mm
- DOutside diameter
- 90 mm3.543 in3.543 in90 mm
- BWidth
- 20 mm0.787 in0.787 in20 mm
Drawing
7210 specifications
| dBore diameter | 50 mm1.969 in |
|---|---|
| DOutside diameter | 90 mm3.543 in |
| BWidth | 20 mm0.787 in |
| αContact angle | 40° (B) |
Also known as
7210B7210BE7210BEP7210BECBP7210BEGAP7210B-2RZ7210AC7210C7210-B-XL-TVP7210-B-XL-MP7210BDB7210BDF7210BDT7210BW7210A
Other angular contact bearings with a 50 mm bore
Same 50 mm bore in other bearing types
6010Ball Bearings6210Ball Bearings6310Ball Bearings30210Tapered Roller Bearings32210Tapered Roller Bearings30310Tapered Roller BearingsNU210Cylindrical Roller BearingsNU310Cylindrical Roller BearingsNU2210Cylindrical Roller Bearings21310Spherical Roller Bearings22210Spherical Roller Bearings22310Spherical Roller Bearings1210Self-Aligning Ball Bearings2310Self-Aligning Ball Bearings1310Self-Aligning Ball Bearings51110Thrust Ball Bearings51210Thrust Ball Bearings51310Thrust Ball BearingsNA4910Needle Roller BearingsUC210Bearing Units (UCP, UCF, UCFL)
All Angular Contact Bearings sizes
Compare all 103 sizes in the Angular Contact Bearings chart →
Sources
- ISO 15:2017, Rolling bearings, radial bearings, boundary dimensions, general plan
- DIN 628-1 / DIN 628-3: Angular contact ball bearings, single row and double row
- SKF: Angular contact ball bearings, product tables (72 BE, 73 BE, 32 A, 33 A)
- Schaeffler (FAG) medias: 72-B, 73-B, 32-B, 33-B angular contact ball bearings
- NSK: Rolling bearings catalogue (CAT. E1102), angular contact ball bearings
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.