4.4 mm Pentaconn (TRRRS): Pinout and Size

Audio Jacks & Connectors · Phone plugs (jacks)

The 4.4 mm Pentaconn (TRRRS) plug is 4.4 mm (0.173 in) in diameter with 5 contacts. Signal: Balanced stereo. Typical use: Balanced headphones on players and DACs (Sony, FiiO and others). Reference: JEITA RC-8141C.

dPlug diameter
4.4 mm0.173 in0.173 in4.4 mm
Contacts
5

Drawing

TipL+Ring 1L−Ring 2R+Ring 3R−SleeveGND4.4 mm0.173 in
Contact order of the plug, schematic; only the diameter is a real dimension.Proportions shown, not to scale · Dimensions in mmDimensions in inches

4.4 mm Pentaconn (TRRRS) specifications

dPlug diameter4.4 mm0.173 in
Contacts5
SignalBalanced stereo
Typical useBalanced headphones on players and DACs (Sony, FiiO and others)
StandardJEITA RC-8141C

4.4 mm Pentaconn (TRRRS) pinout

ContactSignalFunction
TipL+Left, positive
Ring 1L−Left, negative
Ring 2R+Right, positive
Ring 3R−Right, negative
SleeveGNDGround / shield

Five contacts: left and right positive and negative plus a dedicated ground on the sleeve. Introduced by Sony and Nippon DICS and standardized as JEITA RC-8141C.

Also known as

PentaconnTRRRS

Same signal type, other connector

All audio connectors

All 13 connectors in the Audio Jacks & Connectors chart →

Sources

  1. EIA RS-453 / IEC 60603-11: concentric phone plugs (0.206 in type); MIL-DTL-642 telephone plugs
  2. JEITA RC-8141C: 4.4 mm 5-pole (Pentaconn) headphone plug; Nippon DICS Pentaconn product data
  3. IEC 60268-12 / AES14: Application of connectors for broadcast and audio (XLR pin 1 shield, 2 hot, 3 cold)
  4. Neutrik: XLR and speakON (NL2, NL4) connector data sheets and wiring
  5. Switchcraft: 1/4 in and 3.5 mm phone plug drawings
  6. Wikipedia: Phone connector (audio): CTIA vs OMTP TRRS, balanced conventions

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.