2.5 mm TRS: Pinout and Size

Audio Jacks & Connectors · Phone plugs (jacks)

The 2.5 mm TRS plug is 2.5 mm (0.098 in) in diameter with 3 contacts. Signal: Unbalanced stereo. Typical use: Older phones and walkie-talkies, some headphone cables, camera remotes. Reference: 2.5 mm sub-miniature phone plug.

dPlug diameter
2.5 mm0.098 in0.098 in2.5 mm
Contacts
3

Drawing

TipLeftRingRightSleeveGround2.5 mm0.098 in
Contact order of the plug, schematic; only the diameter is a real dimension.Proportions shown, not to scale · Dimensions in mmDimensions in inches

2.5 mm TRS specifications

dPlug diameter2.5 mm0.098 in
Contacts3
SignalUnbalanced stereo
Typical useOlder phones and walkie-talkies, some headphone cables, camera remotes
Standard2.5 mm sub-miniature phone plug

2.5 mm TRS pinout

ContactSignalFunction
TipLeftLeft channel
RingRightRight channel
SleeveGroundCommon ground

Same plug diameter

Same signal type, other connector

All audio connectors

All 13 connectors in the Audio Jacks & Connectors chart →

Sources

  1. EIA RS-453 / IEC 60603-11: concentric phone plugs (0.206 in type); MIL-DTL-642 telephone plugs
  2. JEITA RC-8141C: 4.4 mm 5-pole (Pentaconn) headphone plug; Nippon DICS Pentaconn product data
  3. IEC 60268-12 / AES14: Application of connectors for broadcast and audio (XLR pin 1 shield, 2 hot, 3 cold)
  4. Neutrik: XLR and speakON (NL2, NL4) connector data sheets and wiring
  5. Switchcraft: 1/4 in and 3.5 mm phone plug drawings
  6. Wikipedia: Phone connector (audio): CTIA vs OMTP TRRS, balanced conventions

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.