XLR 3-pin: Pinout and Size

Audio Jacks & Connectors · XLR

The XLR 3-pin connector has 3 contacts. Signal: Balanced mono. Typical use: Microphones, balanced line, DMX lighting (5-pin is the DMX standard). Reference: IEC 61076-2-103; pin use IEC 60268-12 / AES14.

Contacts
3

Drawing

1Shield2Hot (+)3Cold (−)Layout schematic; read the numbers moulded on the connector
Contact layout, schematic.Proportions shown, not to scale

XLR 3-pin specifications

Contacts3
SignalBalanced mono
Typical useMicrophones, balanced line, DMX lighting (5-pin is the DMX standard)
StandardIEC 61076-2-103; pin use IEC 60268-12 / AES14

XLR 3-pin pinout

ContactSignalFunction
1ShieldGround / cable shield
2Hot (+)In-phase signal
3Cold (−)Inverted signal

Male connectors (pins) are outputs, female (sockets) inputs, so signal always flows from male to female. Phantom power (+48 V) for condenser microphones runs on pins 2 and 3 relative to pin 1.

Also known as

XLRXLR3

Detailed pinout in the connectors chart

All audio connectors

All 13 connectors in the Audio Jacks & Connectors chart →

Sources

  1. EIA RS-453 / IEC 60603-11: concentric phone plugs (0.206 in type); MIL-DTL-642 telephone plugs
  2. JEITA RC-8141C: 4.4 mm 5-pole (Pentaconn) headphone plug; Nippon DICS Pentaconn product data
  3. IEC 60268-12 / AES14: Application of connectors for broadcast and audio (XLR pin 1 shield, 2 hot, 3 cold)
  4. Neutrik: XLR and speakON (NL2, NL4) connector data sheets and wiring
  5. Switchcraft: 1/4 in and 3.5 mm phone plug drawings
  6. Wikipedia: Phone connector (audio): CTIA vs OMTP TRRS, balanced conventions

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.