24 AWG Wire Size

AWG Wire Gauge

24 AWG solid wire is 0.0201 in (0.511 mm) in diameter, with a copper cross-section of 0.2047 mm² (404 circular mils). Solid annealed copper of this size has a DC resistance of 84.21 Ω/km (25.67 Ω/1000 ft) at 20 °C.

dDiameter
0.511 mm0.0201 in0.0201 in0.511 mm
ACross-section
0.2047 mm²
RDC resistance, copper 20 °C
84.21 Ω/km

Drawing

⌀0.511 mm⌀0.0201 inSolid0.2047 mm²
⌀0.579 mm⌀0.0228 in7 × ⌀0.193 mm⌀0.0076 in7 strands, same area
Bare conductor without insulation; 7-strand shown as an uncompressed concentric lay.Drawn to scale · Dimensions in mmDimensions in inches

24 AWG specifications

dDiameter0.0201 in0.511 mm
ACross-section0.2047 mm²
Circular mils404
RDC resistance, copper 20 °C84.21 Ω/km
RDC resistance, copper 20 °C25.67 Ω/1000 ft

24 AWG is the conductor size of most Cat5e and Cat6 Ethernet cables (Cat6 is sometimes 23 AWG) and of many USB data pairs.

Also known as

#24

All AWG Wire Gauge sizes

Compare all 44 sizes in the AWG Wire Gauge chart →

Sources

  1. ASTM B258: Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
  2. NFPA 70, National Electrical Code (2023), Table 310.16: Ampacities of insulated conductors, 60/75/90 °C
  3. IEC 60028:1925, International standard of resistance for copper (annealed copper: 1/58 Ω·mm²/m at 20 °C)
  4. IEC 60228:2023, Conductors of insulated cables (metric nominal cross-sections)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.