36 AWG Wire Size

AWG Wire Gauge

36 AWG solid wire is 0.0050 in (0.127 mm) in diameter, with a copper cross-section of 0.0127 mm² (25 circular mils). Solid annealed copper of this size has a DC resistance of 1361 Ω/km (414.8 Ω/1000 ft) at 20 °C.

dDiameter
0.127 mm0.0050 in0.0050 in0.127 mm
ACross-section
0.0127 mm²
RDC resistance, copper 20 °C
1361 Ω/km

Drawing

⌀0.127 mm⌀0.0050 inSolid0.01267 mm²
⌀0.144 mm⌀0.0057 in7 × ⌀0.048 mm⌀0.0019 in7 strands, same area
Bare conductor without insulation; 7-strand shown as an uncompressed concentric lay.Drawn to scale · Dimensions in mmDimensions in inches

36 AWG specifications

dDiameter0.0050 in0.127 mm
ACross-section0.0127 mm²
Circular mils25
RDC resistance, copper 20 °C1361 Ω/km
RDC resistance, copper 20 °C414.8 Ω/1000 ft

36 AWG is one of the two defining points of the AWG scale: exactly 0.005 in (0.127 mm).

Also known as

#36

All AWG Wire Gauge sizes

Compare all 44 sizes in the AWG Wire Gauge chart →

Sources

  1. ASTM B258: Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
  2. NFPA 70, National Electrical Code (2023), Table 310.16: Ampacities of insulated conductors, 60/75/90 °C
  3. IEC 60028:1925, International standard of resistance for copper (annealed copper: 1/58 Ω·mm²/m at 20 °C)
  4. IEC 60228:2023, Conductors of insulated cables (metric nominal cross-sections)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.