40 AWG Wire Size

AWG Wire Gauge

40 AWG solid wire is 0.0031 in (0.079 mm) in diameter, with a copper cross-section of 0.005 mm² (9.89 circular mils). Solid annealed copper of this size has a DC resistance of 3441 Ω/km (1049 Ω/1000 ft) at 20 °C.

dDiameter
0.079 mm0.0031 in0.0031 in0.079 mm
ACross-section
0.005 mm²
RDC resistance, copper 20 °C
3441 Ω/km

Drawing

⌀0.079 mm⌀0.0031 inSolid0.00501 mm²
⌀0.089 mm⌀0.0035 in7 × ⌀0.030 mm⌀0.0012 in7 strands, same area
Bare conductor without insulation; 7-strand shown as an uncompressed concentric lay.Drawn to scale · Dimensions in mmDimensions in inches

40 AWG specifications

dDiameter0.0031 in0.079 mm
ACross-section0.005 mm²
Circular mils9.89
RDC resistance, copper 20 °C3441 Ω/km
RDC resistance, copper 20 °C1049 Ω/1000 ft

40 AWG (0.0031 in, 0.080 mm) appears in fine magnet wire and in the individual strands of very flexible cables.

Also known as

#40

All AWG Wire Gauge sizes

Compare all 44 sizes in the AWG Wire Gauge chart →

Sources

  1. ASTM B258: Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
  2. NFPA 70, National Electrical Code (2023), Table 310.16: Ampacities of insulated conductors, 60/75/90 °C
  3. IEC 60028:1925, International standard of resistance for copper (annealed copper: 1/58 Ω·mm²/m at 20 °C)
  4. IEC 60228:2023, Conductors of insulated cables (metric nominal cross-sections)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.