UCP204 Dimensions

Bearing Units (UCP, UCF, UCFL) · UCP: pillow block (2-bolt base)

UCP204 (UCP: pillow block, 2-bolt base): 20 mm (0.787 in) bore, insert UC204.

dBore diameter
20 mm0.787 in0.787 in20 mm
HShaft centre height
33.3 mm1.311 in1.311 in33.3 mm
JBolt hole spacing
95 mm3.740 in3.740 in95 mm

Drawing

33.3 mm1.311 in95 mm3.740 in127 mm5.000 in
38 mm1.496 in
Pillow block: front view (shaft centre height H, bolt spacing J, length L) and side view (base width A).Drawn to scale · Dimensions in mmDimensions in inches

UCP204 specifications

dBore diameter20 mm0.787 in
HShaft centre height33.3 mm1.311 in
JBolt hole spacing95 mm3.740 in
LOverall length (typical)127 mm5.000 in
ABase width (typical)38 mm1.496 in
Insert bearingUC204
HousingP204

UCP201, UCP202 and UCP203 (12, 15, 17 mm bore) use the same housing family with a lower shaft height (30.2 mm); UCP204 is 33.3 mm.

Also known as

UCP204D1P204UCP204-12

Same size code: insert and other housings

All Bearing Units (UCP, UCF, UCFL) sizes

Compare all 57 sizes in the Bearing Units (UCP, UCF, UCFL) chart →

Sources

  1. ISO 3228:2013, Rolling bearings, cast and pressed housings for insert bearings
  2. ISO 9628: Rolling bearings, insert bearings and eccentric locking collars, boundary dimensions
  3. JIS B 1558 / JIS B 1559: Rolling bearings, insert bearings and housings
  4. Timken: UCP, UCF, UCFL mounted units (cad.timken.com part pages)
  5. FYH: Mounted bearing units catalogue (UCP200, UCF200, UCFL200)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.