Bicycle Hub Spacing and Axle Standards
Two numbers decide whether a wheel fits a frame or fork: the hub spacing (OLD), which is the width across the hub's outer faces and equals the dropout spacing, and the axle diameter. A thru-axle standard names both, axle first: 12 × 142 is a 12 mm axle in a 142 mm-wide rear end; Boost is 110 mm front and 148 mm rear.
Size chartTap a size for its drawing and full specs
| Standard | OLDHub spacing (OLD)mmin | ⌀Axle diametermmin | Axle type | Typical use |
|---|---|---|---|---|
| Front hubs and forks | ||||
| 100 × 9 mm QR | 1003.94 | 90.354 | Quick release (hollow axle, 5 mm skewer) | road and gravel forks with quick release, older mountain bike, hybrid and city forks |
| 12 × 100 mm thru-axle | 1003.94 | 120.472 | Thru-axle | disc-brake road, gravel and cyclocross forks |
| 15 × 100 mm thru-axle | 1003.94 | 150.591 | Thru-axle | mountain bike forks before Boost; some gravel forks |
| 15 × 110 mm Boost | 1104.33 | 150.591 | Thru-axle | mountain bike forks since about 2015 (Boost); most current MTB forks |
| 20 × 110 mm thru-axle | 1104.33 | 200.787 | Thru-axle | downhill and freeride dual-crown forks; some older all-mountain forks |
| 15 × 150 mm (fat bike front) | 1505.91 | 150.591 | Thru-axle | fat bike forks |
| Rear hubs and frames | ||||
| 126 mm QR (old road) | 1264.96 | 100.394 | Quick release (hollow axle, 5 mm skewer) | road bikes with 6- and 7-speed freewheels and cassettes, roughly 1970s to early 1990s |
| 130 mm QR (road) | 1305.12 | 100.394 | Quick release (hollow axle, 5 mm skewer) | rim-brake road bikes with 8- to 12-speed cassettes |
| 135 mm QR | 1355.31 | 100.394 | Quick release (hollow axle, 5 mm skewer) | mountain, hybrid, touring and city bikes; quick-release disc-brake road and gravel bikes |
| 12 × 135 mm thru-axle | 1355.31 | 120.472 | Thru-axle | early thru-axle mountain and road disc frames (largely replaced by 12 × 142) |
| 12 × 142 mm thru-axle | 1425.59 | 120.472 | Thru-axle | disc-brake road and gravel bikes (current standard); mountain bikes before Boost |
| 12 × 148 mm Boost | 1485.83 | 120.472 | Thru-axle | mountain bikes since about 2015 (Boost), many e-MTBs |
| 12 × 150 mm (DH) | 1505.91 | 120.472 | Thru-axle | older downhill frames |
| 12 × 157 mm (DH / Super Boost) | 1576.18 | 120.472 | Thru-axle | downhill frames (157 DH) and some enduro frames (Super Boost Plus, wider-set flanges) |
| 12 × 177 mm (fat bike) | 1776.97 | 120.472 | Thru-axle | fat bikes with up to about 4.0″ tires |
| 12 × 197 mm (fat bike) | 1977.76 | 120.472 | Thru-axle | fat bikes with 4.5–5″ tires |
| 120 mm (track / single-speed) | 1204.72 | 100.394 | Solid axle with nuts | track and single-speed bikes with nutted axles in horizontal dropouts |
No exact match. The nearest sizes:
How to measure hub spacing
Remove the wheel and measure between the inside faces of the dropouts with a caliper or ruler. That is the frame's spacing. On the hub, measure across the outer faces of the locknuts or end caps (not over the axle ends or the skewer). The two numbers should match: 100, 110, 130, 135, 142, 148 or 157 mm.
Then identify the axle. A quick release has a thin skewer (5 mm) through a hollow 9 mm (front) or 10 mm (rear) axle, and the dropouts are open slots. A thru-axle passes through closed holes in the dropouts; its diameter (12, 15 or 20 mm) is usually printed on the axle along with its length and thread pitch. Thru-axle length and thread (e.g. M12 × 1.5, M12 × 1.75, M12 × 1.0) depend on the frame, not the standard, so buy the axle the frame maker specifies.
One trap: 12 × 142 frames measure only about 135 mm between the inner dropout faces, because the hub's end caps sit in 3.5 mm recesses on each side. That is how 142 mm hubs keep the same flange and disc-rotor positions as 135 mm hubs.
About Bike Axle Standards
Quick-release hubs were the norm for decades: 100 mm front, 130 mm rear for road bikes and 135 mm rear for mountain, hybrid and touring bikes (126 mm on older road bikes). Thru-axles replaced them on disc-brake bikes because a larger, captured axle keeps the disc rotor exactly placed relative to the caliper and stiffens the fork and rear triangle.
Boost (15 × 110 front, 12 × 148 rear) moved the hub flanges outward by 5 and 3 mm per side respectively, giving stronger, stiffer 29″ wheels and more tire clearance. The cassette also moves 3 mm outboard, so Boost frames need a Boost-specific crank chainline. Super Boost (157) uses the same 12 × 157 axle width as earlier downhill frames, but most hubs now set their flanges to the wider Super Boost positions.
Converting between standards is often possible with end caps (e.g. many hubs switch between QR, 12 × 135 and 12 × 142 with different caps) or with dedicated adapters, but never across a different flange position: a 142 hub cannot be turned into a Boost 148 by spacers without re-dishing the wheel and moving the rotor, and doing so changes the chainline.
Steel frames tolerate small spacing differences (a 130 mm road frame can usually be spread to take a 135 mm hub), but aluminium and carbon frames must not be cold-set. Always fit the hub to the frame's stated standard.
Front: QR, 12, 15, 20 mm
100 × 9 QR: road, older MTB and hybrid. 12 × 100: disc road and gravel. 15 × 100: MTB before Boost. 15 × 110 Boost: current MTB. 20 × 110: downhill. Fat bikes use 15 × 150 (and older 135 or 150 mm QR) front hubs. A few 20 × 110 "Boost" forks exist with Boost-style flange positions; check the fork maker's note.
Rear: 130 / 135 / 142 / 148 / 157
130 QR: rim-brake road. 135 QR: MTB, hybrid, touring, disc road with QR. 12 × 142: disc road and gravel, MTB before Boost. 12 × 148 Boost: current MTB. 12 × 157: DH and Super Boost. Fat bikes use 12 × 177 or 12 × 197. DH frames also used 12 × 150; track and single-speed hubs are typically 120 mm with nutted axles.
Questions
What is the difference between 142 and 148 Boost?
Both use a 12 mm thru-axle. Boost 148 is 6 mm wider, with the hub flanges about 3 mm farther out on each side for a stiffer wheel, and the cassette and chainline 3 mm outboard. The two are not interchangeable without changing the hub.
What does OLD mean on a bike hub?
Over-locknut dimension: the width of the hub measured across the outer faces of its locknuts or end caps, which is the space it needs between the dropouts. Common values are 100, 110, 130, 135, 142 and 148 mm.
Can I put a 135 mm wheel in a 130 mm frame?
In a steel frame usually yes. The stays flex 2.5 mm per side, and the frame can be cold-set by a shop. Never force it in aluminium or carbon frames.
Is 12 × 100 the same as 15 × 100?
Same hub width, different axle diameter. Many hubs convert between 12 and 15 mm with end caps, but the fork decides: a 15 mm fork needs a 15 mm axle.
What is Super Boost?
A 12 × 157 mm rear standard, the same width as downhill frames, with the hub flanges set wider for a stiffer, more evenly tensioned rear wheel. It also needs a matching wide chainline crank.
Sources
- Park Tool: Hub and axle standards (repair help)
- Sheldon Brown: Hub spacing / frame spacing (OLD) and cassette conversions
- SRAM / RockShox: Maxle and hub standards (Boost 110/148)
- BikeRadar: How big of a deal is Super Boost? (157 mm DH vs Super Boost Plus)
- Industry Nine: hub axle options (10×135 QR, 12×177 and 12×197 fat bike)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.