2.4 mm (3/32") Blind Rivet: Drill Size and Head

Blind Rivets

A 2.4 mm (3/32") blind rivet needs a 2.5 mm (0.098 in) hole. The dome head is typically 5.0 mm (0.197 in) in diameter.

dDiameter
2.4 mm0.094 in0.094 in2.4 mm
d3Recommended hole
2.5 mm0.098 in0.098 in2.5 mm
dkDome head diameter (typical)
5.0 mm0.197 in0.197 in5.0 mm
Inch drill (IFI)
#41 (0.096 in)

Drawing

⌀5.0 mm⌀0.197 in⌀2.4 mm⌀0.094 in
Rivet before setting, with mandrelDrawn to scale · Dimensions in mmDimensions in inches

2.4 mm (3/32") specifications

dDiameter2.4 mm0.094 in
d3Recommended hole2.5 mm0.098 in
dkDome head diameter (typical)5.0 mm0.197 in
Inch equivalent3/32 in
Inch drill (IFI)#41 (0.096 in)

All Blind Rivets sizes

Compare all 8 sizes in the Blind Rivets chart →

Sources

  1. DIN 7337: Blind rivets with break pull mandrel (superseded by the ISO 15977–15984 series)
  2. IFI-114: Break mandrel blind rivets (inch)
  3. Westfield Fasteners: DIN 7337 blind rivets, joint hole table
  4. Timco: Rivets technical data sheet
  5. Rivelit: Standard blind rivets DIN 7337 catalogue

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.