6.0 mm Blind Rivet: Drill Size and Head

Blind Rivets

A 6.0 mm blind rivet needs a 6.1 mm (0.240 in) hole. The dome head is typically 12.0 mm (0.472 in) in diameter.

dDiameter
6.0 mm0.236 in0.236 in6.0 mm
d3Recommended hole
6.1 mm0.240 in0.240 in6.1 mm
dkDome head diameter (typical)
12.0 mm0.472 in0.472 in12.0 mm

Drawing

⌀12.0 mm⌀0.472 in⌀6.0 mm⌀0.236 in
Rivet before setting, with mandrelDrawn to scale · Dimensions in mmDimensions in inches

6.0 mm specifications

dDiameter6.0 mm0.236 in
d3Recommended hole6.1 mm0.240 in
dkDome head diameter (typical)12.0 mm0.472 in

All Blind Rivets sizes

Compare all 8 sizes in the Blind Rivets chart →

Sources

  1. DIN 7337: Blind rivets with break pull mandrel (superseded by the ISO 15977–15984 series)
  2. IFI-114: Break mandrel blind rivets (inch)
  3. Westfield Fasteners: DIN 7337 blind rivets, joint hole table
  4. Timco: Rivets technical data sheet
  5. Rivelit: Standard blind rivets DIN 7337 catalogue

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.