5×120 Bolt Pattern

Bolt Patterns · 5-lug patterns

5×120 means 5 wheel studs on a 120 mm (4.72 in) pitch circle. Neighbouring studs are 70.5 mm (2.78 in) apart, centre to centre, the number to measure on a 5-lug hub. Commonly used by BMW (most models before about 2017); Chevrolet Camaro from 2010; Tesla Model S and Model X; Honda Odyssey, Pilot and Ridgeline; Land Rover Range Rover; Volkswagen Transporter; always check your exact model year, because patterns change between generations.

Number of lugs
5
PCDPitch circle diameter
120 mm4.72 in4.72 in120 mm
sAdjacent stud spacing
70.5 mm2.78 in2.78 in70.5 mm

Drawing

PCD ⌀120 mmPCD ⌀4.72 in5 lugs on the pitch circle (dashed)
s 70.5 mms 2.78 inPCD = s × 1.7013
Drawn to scale · Dimensions in mmDimensions in inches

5×120 specifications

Number of lugs5
PCDPitch circle diameter120 mm4.72 in
sAdjacent stud spacing70.5 mm2.78 in
Commonly used byBMW (most models before about 2017); Chevrolet Camaro from 2010; Tesla Model S and Model X; Honda Odyssey, Pilot and Ridgeline; Land Rover Range Rover; Volkswagen Transporter

Not the same as 5×4.75 in (5×120.65), the older GM pattern. The 0.65 mm difference matters with conical lug nuts. BMW moved most models from 5×120 to 5×112 starting around 2017 (G-series), so check the generation.

Also known as

5-1205×4.72

Close 5-lug patterns (not interchangeable)

Same 120 mm circle, different lug count

All Bolt Patterns sizes

Compare all 28 sizes in the Bolt Patterns chart →

Sources

  1. ISO 4107: Commercial vehicles, wheel-hub attachment dimensions (pitch circle diameters)
  2. SAE J694: Disc wheel/hub or drum interface dimensions, truck and bus
  3. Tire Rack: Wheel bolt patterns and how to measure them
  4. Performance Plus Tire: bolt pattern fitment guides (5x110, 6x120, 6x132, 8x180 …)
  5. wheel-size.com: vehicle fitment database (cross-check of make lists)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.