Wheel Bolt Pattern Chart (PCD)
A bolt pattern such as 5×114.3 is the number of wheel studs (5) and the diameter of the circle through their centres, the pitch circle diameter or PCD, in millimetres (114.3 mm = 4.5 in). A wheel fits the hub only if both numbers match exactly: 5×112 and 5×114.3 look almost identical but are not interchangeable.
Size chartTap a size for its drawing and full specs
| Pattern | Number of lugs | PCDPitch circle diametermmin | sAdjacent stud spacingmmin | Commonly used by |
|---|---|---|---|---|
| 4-lug patterns | ||||
| 4×98 | 4 | 983.86 | 69.32.73 | Fiat, Alfa Romeo and Lancia small cars; Lada (Samara, classic models) |
| 4×100 | 4 | 1003.94 | 70.72.78 | older and small Honda, Toyota, Nissan, Hyundai, Kia and Volkswagen models; Mazda MX-5 (NA/NB); BMW 3 Series E30; Mini (first BMW generation) |
| 4×108 | 4 | 1084.25 | 76.43.01 | Peugeot, Citroën and Ford Europe small cars (Fiesta, Ka, first Focus) |
| 4×114.3 | 4 | 114.34.50 | 80.83.18 | older Japanese and Korean cars: some Nissan, Toyota, Mitsubishi and Hyundai models |
| 5-lug patterns | ||||
| 5×98 | 5 | 983.86 | 57.62.27 | Fiat, Alfa Romeo and Lancia mid-size models; some larger Peugeot and Citroën models |
| 5×100 | 5 | 1003.94 | 58.82.31 | Volkswagen Group small and older models; many Subaru models up to the mid-2010s; Toyota Prius and some Corolla; Toyota 86 / Subaru BRZ |
| 5×105 | 5 | 1054.13 | 61.72.43 | Chevrolet Cruze, Sonic and Trax; Opel/Vauxhall Astra (J and K) |
| 5×108 | 5 | 1084.25 | 63.52.50 | Ford (Focus from Mk2, Fusion/Mondeo, Escape/Kuga recent generations); Volvo; Jaguar; smaller Land Rover models; some Peugeot and Citroën models |
| 5×110 | 5 | 1104.33 | 64.72.55 | Opel/Vauxhall; Saab; Alfa Romeo Giulia and Stelvio; Jeep Renegade, Compass and Cherokee (KL); Fiat 500X |
| 5×112 | 5 | 1124.41 | 65.82.59 | Volkswagen, Audi, Škoda, SEAT; Mercedes-Benz; BMW and Mini models from about 2017 onward |
| 5×114.3 | 5 | 114.34.50 | 67.22.65 | Toyota, Lexus, Honda, Acura, Nissan, Infiniti, Mazda, Hyundai, Kia, Mitsubishi; newer Subaru; Ford Mustang; Tesla Model 3 and Model Y |
| 5×115 | 5 | 1154.53 | 67.62.66 | Chrysler, Dodge (Charger, Challenger, Chrysler 300) and many GM sedans (Chevrolet, Buick, Cadillac); some Opel models |
| 5×120 | 5 | 1204.72 | 70.52.78 | BMW (most models before about 2017); Chevrolet Camaro from 2010; Tesla Model S and Model X; Honda Odyssey, Pilot and Ridgeline; Land Rover Range Rover; Volkswagen Transporter |
| 5×120.65 | 5 | 120.654.75 | 70.92.79 | older GM: Chevrolet Camaro and Pontiac Firebird (to 2002), Corvette (through C7), Chevrolet S-10 / GMC Jimmy 4WD |
| 5×127 | 5 | 1275.00 | 74.62.94 | Jeep Wrangler (JK, JL), Gladiator and Grand Cherokee; Dodge Durango; older GM 2WD trucks and vans |
| 5×130 | 5 | 1305.12 | 76.43.01 | Porsche (911, Cayenne); Volkswagen Touareg; Audi Q7 (first generation); Mercedes-Benz G-Class |
| 5×135 | 5 | 1355.31 | 79.43.13 | Ford F-150 (1997–2003), Expedition (1997–2002), Lincoln Navigator (1998–2002) |
| 5×139.7 | 5 | 139.75.50 | 82.13.23 | Suzuki Jimny; Ram 1500 (2002–2018); older Ford, Dodge and Jeep trucks; Lada Niva |
| 5×150 | 5 | 1505.91 | 88.23.47 | Toyota Land Cruiser (100 and 200 series), Tundra (2007–2021) and Sequoia; Lexus LX |
| 6-lug patterns | ||||
| 6×114.3 | 6 | 114.34.50 | 57.12.25 | Nissan Navara / NP300 and Frontier (several generations) |
| 6×120 | 6 | 1204.72 | 60.02.36 | Chevrolet Colorado and GMC Canyon (2015–2022); Chevrolet Traverse and Buick Enclave (2018 on); GMC Acadia (2017 on) |
| 6×127 | 6 | 1275.00 | 63.52.50 | Chevrolet Trailblazer, GMC Envoy and Buick Rainier (GMT360, 2002–2009) |
| 6×132 | 6 | 1325.20 | 66.02.60 | GM Lambda crossovers: Chevrolet Traverse (to 2017), GMC Acadia (to 2016, Acadia Limited 2017), Buick Enclave (to 2017), Saturn Outlook |
| 6×135 | 6 | 1355.31 | 67.52.66 | Ford F-150 (2004 on), Expedition (2003 on), Lincoln Navigator (2003 on) |
| 6×139.7 | 6 | 139.75.50 | 69.82.75 | Toyota Tacoma, 4Runner, Hilux, Land Cruiser Prado, Tundra (2022 on); Chevrolet Silverado / GMC Sierra 1500, Tahoe, Yukon, Escalade; Nissan Titan and Patrol; Ram 1500 (2019 on); Ford Ranger (recent generations); Mitsubishi and Isuzu pickups |
| 8-lug patterns (heavy-duty trucks) | ||||
| 8×165.1 | 8 | 165.16.50 | 63.22.49 | Ram 2500/3500 heavy-duty pickups; GM 2500HD/3500HD before 2011; Ford F-250/F-350 before Super Duty; Nissan Titan XD |
| 8×170 | 8 | 1706.69 | 65.12.56 | Ford Super Duty F-250/F-350 single rear wheel (1999 on), Excursion |
| 8×180 | 8 | 1807.09 | 68.92.71 | GM 2500HD/3500HD single rear wheel (2011 on): Chevrolet Silverado HD, GMC Sierra HD |
No exact match. The nearest sizes:
How to measure a bolt pattern
4, 6 and 8 lugs: two studs sit exactly opposite each other, so measure from the centre of one stud straight across the hub to the centre of the opposite stud. That distance is the PCD. Measuring from the near edge of one hole to the far edge of the opposite one gives the same result if the holes are the same size.
5 lugs: no stud is opposite another, so a straight measurement across the hub is always wrong. Measure centre-to-centre between two neighbouring studs (s) and multiply by 1.7013 (= 1 ÷ sin 36°). For 5×114.3 the neighbour spacing is 67.2 mm; for 5×112, 65.8 mm; for 5×120, 70.5 mm. The shop trick (measuring from the back edge of one stud to the centre of the stud two places away) only approximates the PCD and cannot separate 5×112 from 5×114.3.
A caliper is accurate enough, a tape measure is not: several common patterns differ by only 1–3 mm (5×112 / 5×114.3 / 5×115, 5×120 / 5×120.65, 8×165.1 / 8×170). The bolt pattern gauge templates sold at parts stores work the same way. If you can, read the pattern from the owner's manual or the wheel itself; it is often cast on the back of the spokes (e.g. 5X114.3).
About Bolt Patterns
The bolt pattern is only one of four numbers that decide whether a wheel fits. The others are the centre bore (the hole that centres the wheel on the hub; hub-centric wheels need it to match, or a hub-centric ring), the offset (ET, how far the mounting face sits from the wheel centreline) and the lug thread and seat (M12 × 1.5, M14 × 1.5, ½″-20 …, with conical, ball or flat seats). Change only one and the wheel can still fail to fit or come loose.
Make lists on this page are brand-level summaries of what each pattern is commonly used by. Manufacturers change patterns between generations, and one model can use two patterns in the same year (different trims, 2WD/4WD). Always check your exact model year in the owner's manual, a fitment database or on the wheel before buying.
Metric and inch patterns coexist. US and Japanese makers historically used inch values (4.5 in = 114.3 mm, 4.75 in = 120.65 mm, 5 in = 127 mm, 5.5 in = 139.7 mm, 6.5 in = 165.1 mm), while European makers use round millimetres (100, 108, 112, 120, 130). Because 5×120 and 5×4.75 (120.65 mm) differ by only 0.65 mm, some wheels are sold as fitting both; they do it with slightly elongated holes or floating seats, not because the patterns are the same.
Adapters and wobble bolts exist for converting between close patterns, but they move the wheel outward (adapters) or depend on correct installation (wobble bolts). Treat them as engineering decisions with load and torque implications, not cosmetic ones.
Patterns that are easy to confuse
5×112 vs 5×114.3 vs 5×115: 2.3 mm and 0.7 mm apart. A 5×114.3 wheel can sometimes be forced onto a 5×115 hub; the studs are then loaded in bending and the nuts do not seat squarely. Do not do it.
5×120 vs 5×120.65 (5×4.75): BMW / Tesla / Camaro (2010 on) versus older GM. The difference is 0.65 mm; it matters with conical seats.
8×165.1 (8×6.5) vs 8×170 vs 8×180: Ram and older GM/Ford, Ford Super Duty, current GM HD. They look similar at a glance but are not interchangeable.
Dual-drilled wheels
Many aftermarket wheels carry two patterns, e.g. 5×100 / 5×114.3 or 6×135 / 6×139.7, with alternating hole positions. They are a convenience for retailers, not a sign that the patterns are compatible; the second set of holes simply stays unused.
Questions
How do you measure a 5-lug bolt pattern?
Measure centre-to-centre between two neighbouring studs and multiply by 1.7013. For example 67.2 mm × 1.7013 = 114.3 mm, a 5×114.3 (5×4.5 in) pattern. A straight measurement across the hub does not work on 5-lug patterns because no two studs are opposite.
Is 5×114.3 the same as 5×4.5?
Yes. 4.5 in × 25.4 = 114.3 mm, so 5×114.3 and 5×4.5 are two names for one pattern. Likewise 5×127 = 5×5, 5×139.7 = 5×5.5, 6×139.7 = 6×5.5 and 8×165.1 = 8×6.5.
Will 5×112 wheels fit a 5×114.3 car?
No. The circles differ by 2.3 mm, enough that the studs bind and the nuts cannot seat. Use the correct pattern, or a properly engineered adapter that also corrects offset and centre bore.
Is 5×120 the same as 5×4.75?
No. 5×120 is 120.0 mm; 5×4.75 is 120.65 mm. Some wheels are made to accept both, but a wheel drilled for one is not automatically correct for the other.
Which bolt pattern does my car have?
Check the owner's manual, a wheel fitment database for your exact model year, or the back of the factory wheel. Patterns change between generations. For example, the Ford F-150 went from 5×135 to 6×135 in 2004, and GM HD trucks from 8×165.1 to 8×180 in 2011.
Sources
- ISO 4107: Commercial vehicles, wheel-hub attachment dimensions (pitch circle diameters)
- SAE J694: Disc wheel/hub or drum interface dimensions, truck and bus
- Tire Rack: Wheel bolt patterns and how to measure them
- Performance Plus Tire: bolt pattern fitment guides (5x110, 6x120, 6x132, 8x180 …)
- wheel-size.com: vehicle fitment database (cross-check of make lists)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.