6×139.7 Bolt Pattern

Bolt Patterns · 6-lug patterns

6×139.7 means 6 wheel studs on a 139.7 mm (5.50 in) pitch circle. Neighbouring studs are 69.8 mm (2.75 in) apart, centre to centre, the number to measure on a 5-lug hub. Commonly used by Toyota Tacoma, 4Runner, Hilux, Land Cruiser Prado, Tundra (2022 on); Chevrolet Silverado / GMC Sierra 1500, Tahoe, Yukon, Escalade; Nissan Titan and Patrol; Ram 1500 (2019 on); Ford Ranger (recent generations); Mitsubishi and Isuzu pickups; always check your exact model year, because patterns change between generations.

Number of lugs
6
PCDPitch circle diameter
139.7 mm5.50 in5.50 in139.7 mm
sAdjacent stud spacing
69.8 mm2.75 in2.75 in69.8 mm

Drawing

PCD ⌀139.7 mmPCD ⌀5.50 in6 lugs on the pitch circle (dashed)
s 69.8 mms 2.75 inPCD = s × 2.0000, or opposite studs centre to centre
Drawn to scale · Dimensions in mmDimensions in inches

6×139.7 specifications

Number of lugs6
PCDPitch circle diameter139.7 mm5.50 in
sAdjacent stud spacing69.8 mm2.75 in
Inch designation6 × 5.5 in
Commonly used byToyota Tacoma, 4Runner, Hilux, Land Cruiser Prado, Tundra (2022 on); Chevrolet Silverado / GMC Sierra 1500, Tahoe, Yukon, Escalade; Nissan Titan and Patrol; Ram 1500 (2019 on); Ford Ranger (recent generations); Mitsubishi and Isuzu pickups

6 × 5.5 in, the common pattern of mid-size and full-size pickups and body-on-frame SUVs. Wheels with this pattern can still differ in centre bore (e.g. 106.1 mm Toyota, 78.1 mm GM) and seat type.

Also known as

6-139.76×5.5

Close 6-lug patterns (not interchangeable)

Same 139.7 mm circle, different lug count

All Bolt Patterns sizes

Compare all 28 sizes in the Bolt Patterns chart →

Sources

  1. ISO 4107: Commercial vehicles, wheel-hub attachment dimensions (pitch circle diameters)
  2. SAE J694: Disc wheel/hub or drum interface dimensions, truck and bus
  3. Tire Rack: Wheel bolt patterns and how to measure them
  4. Performance Plus Tire: bolt pattern fitment guides (5x110, 6x120, 6x132, 8x180 …)
  5. wheel-size.com: vehicle fitment database (cross-check of make lists)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.