18-415 Neck Finish Dimensions

Bottle Cap Threads · 415 series (2 turns, tallest)

A 18-415 neck finish measures 0.688–0.704 in (17.48–17.88 mm) across the thread crests (T). The finish is 0.602–0.632 in (15.29–16.05 mm) high (H) with 8 threads per inch.

TThread OD (T)
17.48–17.88 mm0.688–0.704 in0.688–0.704 in17.48–17.88 mm
HFinish height (H)
15.29–16.05 mm0.602–0.632 in0.602–0.632 in15.29–16.05 mm
Threads per inch
8
PPitch
3.18 mm0.125 in0.125 in3.18 mm

Drawing

I ≥ 8.26 mmI ≥ 0.325 inT 17.48–17.88 mmT 0.688–0.704 inH 15.29–16.05 mmH 0.602–0.632 in
Mid values to scale. 8 threads per inch; thread turns: 2 (720°).Schematic, not to scale · Dimensions in mmDimensions in inches

18-415 specifications

TThread OD (T)0.688–0.704 in17.48–17.88 mm
HFinish height (H)0.602–0.632 in15.29–16.05 mm
STop to thread (S)0.022–0.052 in0.56–1.32 mm
IBore, min (I)0.325 in8.26 mm
Threads per inch8
PPitch3.18 mm0.125 in
Thread turns2 (720°)
Starts1
StandardSPI/GPI 415

Same diameter, other styles

All Bottle Cap Threads sizes

Compare all 20 sizes in the Bottle Cap Threads chart →

Sources

  1. CKS Packaging: S.P.I. Specifications (T, H 400/410/415, S, I, threads per inch, max/min in inches)
  2. BOSL2 OpenSCAD library, bottlecaps.scad: SPI thread table (from ISBT thread specs) and PCO 1810/1881 neck geometry
  3. 3plastics: Plastic bottle cap threads specifications (T with tolerances): cross-check
  4. Multidesign: Neck finishes glossary (400 series S, pitch, H, I; PCO and 38 mm three-start): cross-check
  5. Contapack: Selected SPI neck finish specifications (mm): cross-check
  6. Wikipedia: Plastic bottle, PCO 1881 (17 mm finish height, 3.8 g neck, ISBT voluntary guideline)
  7. ISBT Threadspecs (PCO 1881 drawing 3784253-21)
  8. CETIE: Finish data sheets (GME 30.25, 38 mm three-start, 16.50 mm height)
  9. PETmolder: What is PCO 1881 neck finish (neck weight 3.8 g): cross-check

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.