28-410 Neck Finish Dimensions

Bottle Cap Threads · 410 series (1.5 turns, taller)

A 28-410 neck finish measures 1.068–1.088 in (27.13–27.64 mm) across the thread crests (T). The finish is 0.693–0.723 in (17.60–18.36 mm) high (H) with 6 threads per inch.

TThread OD (T)
27.13–27.64 mm1.068–1.088 in1.068–1.088 in27.13–27.64 mm
HFinish height (H)
17.60–18.36 mm0.693–0.723 in0.693–0.723 in17.60–18.36 mm
Threads per inch
6
PPitch
4.23 mm0.167 in0.167 in4.23 mm

Drawing

I ≥ 15.60 mmI ≥ 0.614 inT 27.13–27.64 mmT 1.068–1.088 inH 17.60–18.36 mmH 0.693–0.723 in
Mid values to scale. 6 threads per inch; thread turns: 1.5 (540°).Schematic, not to scale · Dimensions in mmDimensions in inches

28-410 specifications

TThread OD (T)1.068–1.088 in27.13–27.64 mm
HFinish height (H)0.693–0.723 in17.60–18.36 mm
STop to thread (S)0.031–0.061 in0.79–1.55 mm
IBore, min (I)0.614 in15.60 mm
Threads per inch6
PPitch4.23 mm0.167 in
Thread turns1.5 (540°)
Starts1
StandardSPI/GPI 410

Same diameter, other styles

All Bottle Cap Threads sizes

Compare all 20 sizes in the Bottle Cap Threads chart →

Sources

  1. CKS Packaging: S.P.I. Specifications (T, H 400/410/415, S, I, threads per inch, max/min in inches)
  2. BOSL2 OpenSCAD library, bottlecaps.scad: SPI thread table (from ISBT thread specs) and PCO 1810/1881 neck geometry
  3. 3plastics: Plastic bottle cap threads specifications (T with tolerances): cross-check
  4. Multidesign: Neck finishes glossary (400 series S, pitch, H, I; PCO and 38 mm three-start): cross-check
  5. Contapack: Selected SPI neck finish specifications (mm): cross-check
  6. Wikipedia: Plastic bottle, PCO 1881 (17 mm finish height, 3.8 g neck, ISBT voluntary guideline)
  7. ISBT Threadspecs (PCO 1881 drawing 3784253-21)
  8. CETIE: Finish data sheets (GME 30.25, 38 mm three-start, 16.50 mm height)
  9. PETmolder: What is PCO 1881 neck finish (neck weight 3.8 g): cross-check

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.