BB30A Bottom Bracket Dimensions

Bottom Brackets · Direct-fit shells (bearings pressed straight into the frame)

A BB30A bottom bracket shell is 73 mm (2.87 in) wide with a 42 mm (1.654 in) inside diameter (Direct-fit shells, bearings pressed straight into the frame). Bearings: 6806 bearings pressed into the shell; shell extended 5 mm on the non-drive side. Crank spindles available for this shell: 30 mm (BB30A-length cranks); DUB and 24 mm with adapter BBs.

WShell width
73 mm2.87 in2.87 in73 mm
⌀Shell inside diameter
42 mm1.654 in1.654 in42 mm

Drawing

73 mm2.87 in⌀42 mm⌀1.654 inSection: bearings pressed straight into the bore (schematic)
Drawn to scale · Dimensions in mmDimensions in inches

BB30A specifications

WShell width73 mm2.87 in
⌀Shell inside diameter42 mm1.654 in
Bearings6806 bearings pressed into the shell; shell extended 5 mm on the non-drive side
Crank spindles available30 mm (BB30A-length cranks); DUB and 24 mm with adapter BBs

Other shells with a 42 mm inside diameter

All Bottom Brackets sizes

Compare all 15 sizes in the Bottom Brackets chart →

Sources

  1. Park Tool: Bottom bracket standards and terminology
  2. Sheldon Brown: Threaded bottom bracket crib sheet
  3. Sheldon Brown: Unthreaded bottom bracket crib sheet
  4. Wheels Manufacturing: Bottom bracket standards chart
  5. BikeRadar: The complete guide to bottom bracket standards

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.