PF30 Bottom Bracket Dimensions

Bottom Brackets · Press-fit shells (cups pressed into the frame)

A PF30 bottom bracket shell is 68 mm (2.68 in) wide with a 46 mm (1.811 in) inside diameter (Press-fit shells, cups pressed into the frame). Bearings: bearings in nylon or alloy cups pressed into the shell. Crank spindles available for this shell: 30 mm native; 24 mm, GXP and DUB with matching BBs.

WShell width
68 mm2.68 in2.68 in68 mm
⌀Shell inside diameter
46 mm1.811 in1.811 in46 mm

Drawing

68 mm2.68 in⌀46 mm⌀1.811 inSection: cups pressed into a smooth bore (schematic)
Drawn to scale · Dimensions in mmDimensions in inches

PF30 specifications

WShell width68 mm2.68 in
Alternative shell width73 mm2.87 in
⌀Shell inside diameter46 mm1.811 in
Bearingsbearings in nylon or alloy cups pressed into the shell
Crank spindles available30 mm native; 24 mm, GXP and DUB with matching BBs

PF30 is BB30's bore widened to 46 mm to take cups. Do not confuse the two: a PF30 BB will not stay in a 42 mm BB30 shell, and a BB30 bearing will rattle in a PF30 shell.

Also known as

PF46

Other shells with a 46 mm inside diameter

All Bottom Brackets sizes

Compare all 15 sizes in the Bottom Brackets chart →

Sources

  1. Park Tool: Bottom bracket standards and terminology
  2. Sheldon Brown: Threaded bottom bracket crib sheet
  3. Sheldon Brown: Unthreaded bottom bracket crib sheet
  4. Wheels Manufacturing: Bottom bracket standards chart
  5. BikeRadar: The complete guide to bottom bracket standards

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.