T47 (outboard) Bottom Bracket Dimensions

Bottom Brackets · Threaded shells

A T47 (outboard) bottom bracket shell is 68 mm (2.68 in) wide with a 47 mm (1.850 in) inside diameter (Threaded shells). Bearings: outboard cups. Crank spindles available for this shell: 24 mm, GXP 24/22, DUB 28.99, 30 mm.

WShell width
68 mm2.68 in2.68 in68 mm
⌀Shell inside diameter
47 mm1.850 in1.850 in47 mm
Thread
M47 × 1

Drawing

68 mm2.68 in⌀47 mm⌀1.850 inSection through the shell: threaded at both ends
Drawn to scale · Dimensions in mmDimensions in inches

T47 (outboard) specifications

WShell width68 mm2.68 in
Alternative shell width73 mm2.87 in
⌀Shell inside diameter47 mm1.850 in
ThreadM47 × 1
Drive-side thread directionLeft-hand (reverse), tightens anticlockwise
Bearingsoutboard cups
Crank spindles available24 mm, GXP 24/22, DUB 28.99, 30 mm

Also known as

T47T47a

Other shells with a 47 mm inside diameter

All Bottom Brackets sizes

Compare all 15 sizes in the Bottom Brackets chart →

Sources

  1. Park Tool: Bottom bracket standards and terminology
  2. Sheldon Brown: Threaded bottom bracket crib sheet
  3. Sheldon Brown: Unthreaded bottom bracket crib sheet
  4. Wheels Manufacturing: Bottom bracket standards chart
  5. BikeRadar: The complete guide to bottom bracket standards

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.