R7s Bulb Base

Light Bulb Bases · Pin, twist-lock, wedge and double-ended

R7s is a Double-ended lamp base defined in IEC 60061-1, used mainly in: Worldwide. The table below gives its designating dimension.

Base type
Double-ended
dDiameter
7 mm0.276 in0.276 in7 mm
Main region
Worldwide

Drawing

⌀7 mm⌀0.276 incontact at each end; lamp length 78, 118, 189 or 254 mm
Proportions shown, not to scale · Dimensions in mmDimensions in inches

R7s specifications

Base typeDouble-ended
dDiameter7 mm0.276 in
Main regionWorldwide
Typical lampslinear halogen floodlights

R7s has a recessed contact of 7 mm diameter at each end of a double-ended linear halogen lamp. The lamp length must match the fixture: 78 mm and 118 mm are the most common, with 189 mm and 254 mm for larger floodlights.

Also known as

J78J118

All Light Bulb Bases sizes

Compare all 29 sizes in the Light Bulb Bases chart →

Sources

  1. IEC 60061-1: Lamp caps and holders together with gauges for the control of interchangeability and safety, Part 1: Lamp caps
  2. ANSI C81.61: Electric lamp bases, specifications for bases (caps) for electric lamps
  3. GE Lighting: Lamp components, bases and IEC codes (1995)
  4. Lamptech: IEC cap nomenclature

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.