Light Bulb Base Chart: E26, E27, E12, GU10, MR16, B22

A lamp base name gives its key size: E27 is an Edison screw about 27 mm across, B22d a 22 mm bayonet, GU10 a twist-lock base with pins 10 mm apart. E26 (North America) and E27 (Europe) differ by only 1 mm and usually interchange, but the lamp's voltage must match the supply.

29 sizesChecked 2026-11-154 sources
Thread diameters to scale; the number in the name is the diameter in mm.Drawn to scale

Size chartTap a size for its drawing and full specs

29 of 29
BaseBase typedDiametermminpPin spacingmminMain regionTypical lamps
Edison screw (E)
E5Screw (Edison)50.197—Worldwideindicator lamps, string lights
E10Screw (Edison)100.394—Worldwideflashlights, string lights, indicator lamps
E11Screw (Edison)110.433—North Americamini halogen
E12Screw (Edison)120.472—North Americacandle and chandelier lamps, night lights, string lights
E14Screw (Edison)140.551—Europe and most 230 V countriescandle and chandelier lamps, appliance lamps, night lights
E17Screw (Edison)170.669—North Americaappliance lamps, ceiling fan and decorative lamps
E26Screw (Edison)261.024—North America, Japanhousehold A-lamps
E27Screw (Edison)271.063—Europe and most 230 V countrieshousehold A-lamps
E39Screw (Edison)391.535—North Americastreet lighting, high-bay lamps
E40Screw (Edison)401.575—Europe and most 230 V countriesstreet lighting, high-bay lamps
Bayonet (B, BA, BAY)
BA9sBayonet90.354—Worldwideindicator lamps, vehicle lamps
BA15sBayonet150.591—Worldwidevehicle lamps, signal lamps
BA15dBayonet150.591—Worldwidevehicle lamps, signal lamps, marine navigation lights
BAY15dBayonet150.591—Worldwidevehicle lamps
B15dBayonet150.591—UK, Ireland, Commonwealth, Francesmall household lamps, appliance lamps
B22dBayonet220.866—UK, Ireland, Commonwealth, Francehousehold A-lamps
Pin, twist-lock, wedge and double-ended
G4Bi-pin—40.1575Worldwidehalogen and LED capsules
GU4Bi-pin—40.1575WorldwideMR11 reflectors
GY6.35Bi-pin—6.350.2500Worldwidehalogen and LED capsules
G5Bi-pin—50.1969WorldwideT5 fluorescent and LED tubes
G9Bi-pin—90.3543Europe and most 230 V countrieshalogen and LED capsules
G13Bi-pin—12.70.5000WorldwideT8 tubes, T12 tubes
GU5.3Bi-pin—5.330.2098WorldwideMR16 reflectors (12 V)
GU10Twist-lock bi-pin—100.3937WorldwidePAR16 / MR16-size spots (mains voltage)
GU24Twist-lock bi-pin—240.9449North Americacompact fluorescent and LED lamps, household A-lamps
GX53Twist-lock bi-pin—532.0866Worldwideflat puck downlights
2G11Four-pin plug-in——Worldwidelong compact fluorescent (PL-L, TC-L)
R7sDouble-ended70.276—Worldwidelinear halogen floodlights
W2.1×9.5dWedge——Worldwidevehicle lamps, indicator lamps

How to read a lamp base code

IEC 60061 codes start with letters for the base family and end with the key dimension in millimetres. E = Edison screw, number = thread diameter (E27 ≈ 27 mm). B = bayonet, number = shell diameter; BA bayonets are a separate set of dimension sheets, mostly for vehicle and signal lamps; BAY means the two pins sit at different heights so the lamp can only go in one way. A final s means one contact on the bottom, d two contacts.

G means two or more pins, and the number is the pin spacing centre to centre: G4 = 4 mm, GU5.3 = 5.33 mm, G13 = 12.7 mm. A U, X, Y or Z after the G marks a variant of the pin shape or a keying feature. GU10, GU24 and GX53 are twist-lock: the pins have thickened ends, you push the lamp in and turn it. A leading digit (2G11) gives the number of pin pairs.

R7s is a double-ended base: a recessed contact of 7 mm diameter at each end of a linear halogen lamp. W2.1×9.5d is a wedge base: the glass is pressed into a 9.5 mm wide, 2.1 mm thick tongue with the wires folded over it.

To identify a base, measure the thread or shell outside diameter with a caliper, or the distance between pin centres. A screw base that measures 26 mm across the threads can be E26 or E27; the region of purchase usually tells which.

About Light Bulb Bases

The table lists the designating dimension of each base: thread or shell diameter for screw and bayonet bases, pin spacing for pin bases, width and thickness for wedge bases. The full IEC 60061-1 data sheets hold many more toleranced dimensions (thread profile, shell length, contact sizes), which matter for making lamps and holders but not for identifying them.

E26 and E27 are dimensionally almost identical, and lamps generally screw into either holder; the difference that matters is voltage. A 120 V lamp in a 230 V socket fails instantly, and many 230 V lamps do not start on 120 V. The same applies to E12 (North American candelabra) and E14 (European candle lamps): they are different sizes and do not interchange.

Bayonet bases are mainly British and Commonwealth household bases (B22d, B15d) and vehicle bases (BA15s, BAY15d, BA9s). Pin bases separate low-voltage lamps from mains lamps: GU5.3 (MR16) and G4 are normally 12 V, while GU10 and G9 run directly on mains voltage. The different pins prevent a 12 V lamp from being fitted in a mains holder.

Car bulb bases

Vehicle signal lamps use BA15s (1156, P21W), BAY15d (1157, P21/5W, with two filaments for tail and brake) and the W2.1×9.5d wedge (T10, 194, W5W) for small marker and interior lights. BA15s and BAY15d look alike: count the contacts on the bottom (one or two) and check whether the pins are at the same height. Headlamp bases (H4, H7, 9005 …) follow their own standards and are not listed here.

Questions

Are E26 and E27 bulbs interchangeable?

Mechanically yes in almost all cases: the threads differ by about 1 mm in nominal diameter. Electrically only if the lamp is rated for your supply voltage: 120 V in North America, 220–240 V in most other countries. Many LED lamps are marked for both.

What is the difference between E12 and E14?

E12 is the North American candelabra base (about 12 mm), E14 the European small Edison screw (about 14 mm). An E12 lamp is loose in an E14 socket and an E14 lamp will not go into an E12 socket. Adapters exist.

What is the difference between GU10 and GU5.3 (MR16)?

GU10 has thick-ended pins 10 mm apart, twists in and runs on mains voltage. GU5.3 has thin straight pins 5.33 mm apart, pushes in and normally runs on 12 V. The lamps can look identical from the front.

What does B22d mean?

B = bayonet, 22 = 22 mm shell diameter, d = two contacts on the bottom. It is the standard household base in the UK, Ireland, Australia, New Zealand and India.

What is the difference between 1156 and 1157 bulbs?

1156 has a BA15s base: one bottom contact, pins at the same height, one filament. 1157 has a BAY15d base: two contacts, pins at different heights, two filaments (tail and brake). They are not interchangeable.

Sources

  1. IEC 60061-1: Lamp caps and holders together with gauges for the control of interchangeability and safety, Part 1: Lamp caps
  2. ANSI C81.61: Electric lamp bases, specifications for bases (caps) for electric lamps
  3. GE Lighting: Lamp components, bases and IEC codes (1995)
  4. Lamptech: IEC cap nomenclature

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.