MC10×25 Channel Dimensions & Properties

C & MC Channels (AISC) · MC shapes: miscellaneous channels

MC10×25 is an AISC MC shapes: miscellaneous channels channel. It is 10 in (254.0 mm) deep with a 3.41 in (86.6 mm) flange, a 0.38 in (9.7 mm) web and an average flange thickness of 0.575 in (14.6 mm), and weighs 25 lb/ft (37.2 kg/m). Area 7.34 in² (4,735 mm²); centroid 0.953 in (24.2 mm) from the back of the web; Ix = 110 in⁴ (4,578.5 cm⁴), Sx = 22 in³ (360.5 cm³).

dDepth
254.0 mm10 in10 in254.0 mm
bfFlange width
86.6 mm3.41 in3.41 in86.6 mm
twWeb thickness
9.7 mm0.38 in0.38 in9.7 mm
tfFlange thickness (average)
14.6 mm0.575 in0.575 in14.6 mm

Drawing

86.6 mm3.41 in254.0 mm10 intf 14.6 mmtf 0.575 intw 9.7 mmtw 0.38 ine 24.2 mme 0.953 in
Flanges drawn parallel; MC flange slopes vary by shape.Drawn to scale · Dimensions in mmDimensions in inches

MC10×25 specifications

dDepth10 in254.0 mm
bfFlange width3.41 in86.6 mm
twWeb thickness0.38 in9.7 mm
tfFlange thickness (average)0.575 in14.6 mm
kDesign value1.31 in33.3 mm
kDetailing value1 5/16 in33.3 mm
WWeight25 lb/ft37.2 kg/m
AArea7.34 in²4,735 mm²
x̄Centroid from back of web0.953 in24.2 mm
eoShear centre from web1.03 in26.2 mm
IxMoment of inertia, strong axis110 in⁴4,578.5 cm⁴
ZxPlastic modulus, strong axis26.2 in³429.3 cm³
SxSection modulus, strong axis22 in³360.5 cm³
rxRadius of gyration, strong axis3.87 in98.3 mm
IyMoment of inertia, weak axis7.25 in⁴301.8 cm⁴
ZyPlastic modulus, weak axis5.65 in³92.6 cm³
SySection modulus, weak axis2.96 in³48.5 cm³
ryRadius of gyration, weak axis0.99 in25.2 mm
JTorsional constant0.638 in⁴26.56 cm⁴
Metric designationMC250×37

Also known as

MC250×37

Channels of the same depth in the other series

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.