C10×30 Channel Dimensions & Properties

C & MC Channels (AISC) · C shapes: American Standard channels

C10×30 is an AISC C shapes: American Standard channels channel. It is 10 in (254.0 mm) deep with a 3.03 in (77.0 mm) flange, a 0.673 in (17.1 mm) web and an average flange thickness of 0.436 in (11.1 mm), and weighs 30 lb/ft (44.6 kg/m). Area 8.81 in² (5,684 mm²); centroid 0.649 in (16.5 mm) from the back of the web; Ix = 103 in⁴ (4,287.2 cm⁴), Sx = 20.7 in³ (339.2 cm³).

dDepth
254.0 mm10 in10 in254.0 mm
bfFlange width
77.0 mm3.03 in3.03 in77.0 mm
twWeb thickness
17.1 mm0.673 in0.673 in17.1 mm
tfFlange thickness (average)
11.1 mm0.436 in0.436 in11.1 mm

Drawing

77.0 mm3.03 in254.0 mm10 intf 11.1 mmtf 0.436 intw 17.1 mmtw 0.673 ine 16.5 mme 0.649 in
Drawn to scale · Dimensions in mmDimensions in inches

C10×30 specifications

dDepth10 in254.0 mm
bfFlange width3.03 in77.0 mm
twWeb thickness0.673 in17.1 mm
tfFlange thickness (average)0.436 in11.1 mm
kDesign value1 in25.4 mm
kDetailing value1 1/16 in27.0 mm
WWeight30 lb/ft44.6 kg/m
AArea8.81 in²5,684 mm²
x̄Centroid from back of web0.649 in16.5 mm
eoShear centre from web0.368 in9.3 mm
IxMoment of inertia, strong axis103 in⁴4,287.2 cm⁴
ZxPlastic modulus, strong axis26.7 in³437.5 cm³
SxSection modulus, strong axis20.7 in³339.2 cm³
rxRadius of gyration, strong axis3.43 in87.1 mm
IyMoment of inertia, weak axis3.93 in⁴163.6 cm⁴
ZyPlastic modulus, weak axis3.78 in³61.9 cm³
SySection modulus, weak axis1.65 in³27 cm³
ryRadius of gyration, weak axis0.67 in17.0 mm
JTorsional constant1.22 in⁴50.78 cm⁴
Metric designationC250×45

Also known as

C250×45

Channels of the same depth in the other series

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.