MC10×8.4 Channel Dimensions & Properties

C & MC Channels (AISC) · MC shapes: miscellaneous channels

MC10×8.4 is an AISC MC shapes: miscellaneous channels channel. It is 10 in (254.0 mm) deep with a 1.5 in (38.1 mm) flange, a 0.17 in (4.3 mm) web and an average flange thickness of 0.28 in (7.1 mm), and weighs 8.4 lb/ft (12.5 kg/m). Area 2.46 in² (1,587 mm²); centroid 0.284 in (7.2 mm) from the back of the web; Ix = 31.9 in⁴ (1,327.8 cm⁴), Sx = 6.39 in³ (104.7 cm³).

dDepth
254.0 mm10 in10 in254.0 mm
bfFlange width
38.1 mm1.5 in1.5 in38.1 mm
twWeb thickness
4.3 mm0.17 in0.17 in4.3 mm
tfFlange thickness (average)
7.1 mm0.28 in0.28 in7.1 mm

Drawing

38.1 mm1.5 in254.0 mm10 intf 7.1 mmtf 0.28 intw 4.3 mmtw 0.17 ine 7.2 mme 0.284 in
Flanges drawn parallel; MC flange slopes vary by shape.Drawn to scale · Dimensions in mmDimensions in inches

MC10×8.4 specifications

dDepth10 in254.0 mm
bfFlange width1.5 in38.1 mm
twWeb thickness0.17 in4.3 mm
tfFlange thickness (average)0.28 in7.1 mm
kDesign value0.75 in19.0 mm
kDetailing value3/4 in19.0 mm
WWeight8.4 lb/ft12.5 kg/m
AArea2.46 in²1,587 mm²
x̄Centroid from back of web0.284 in7.2 mm
eoShear centre from web0.332 in8.4 mm
IxMoment of inertia, strong axis31.9 in⁴1,327.8 cm⁴
ZxPlastic modulus, strong axis7.92 in³129.8 cm³
SxSection modulus, strong axis6.39 in³104.7 cm³
rxRadius of gyration, strong axis3.61 in91.7 mm
IyMoment of inertia, weak axis0.326 in⁴13.6 cm⁴
ZyPlastic modulus, weak axis0.548 in³9 cm³
SySection modulus, weak axis0.268 in³4.4 cm³
ryRadius of gyration, weak axis0.36 in9.2 mm
JTorsional constant0.041 in⁴1.72 cm⁴
Metric designationMC250×12.5

Also known as

MC250×12.5

Channels of the same depth in the other series

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.