MC12×35 Channel Dimensions & Properties

C & MC Channels (AISC) · MC shapes: miscellaneous channels

MC12×35 is an AISC MC shapes: miscellaneous channels channel. It is 12 in (304.8 mm) deep with a 3.77 in (95.8 mm) flange, a 0.465 in (11.8 mm) web and an average flange thickness of 0.7 in (17.8 mm), and weighs 35 lb/ft (52.1 kg/m). Area 10.3 in² (6,645 mm²); centroid 1.05 in (26.7 mm) from the back of the web; Ix = 216 in⁴ (8,990.6 cm⁴), Sx = 36 in³ (589.9 cm³).

dDepth
304.8 mm12 in12 in304.8 mm
bfFlange width
95.8 mm3.77 in3.77 in95.8 mm
twWeb thickness
11.8 mm0.465 in0.465 in11.8 mm
tfFlange thickness (average)
17.8 mm0.7 in0.7 in17.8 mm

Drawing

95.8 mm3.77 in304.8 mm12 intf 17.8 mmtf 0.7 intw 11.8 mmtw 0.465 ine 26.7 mme 1.05 in
Flanges drawn parallel; MC flange slopes vary by shape.Drawn to scale · Dimensions in mmDimensions in inches

MC12×35 specifications

dDepth12 in304.8 mm
bfFlange width3.77 in95.8 mm
twWeb thickness0.465 in11.8 mm
tfFlange thickness (average)0.7 in17.8 mm
kDesign value1.31 in33.3 mm
kDetailing value1 5/16 in33.3 mm
WWeight35 lb/ft52.1 kg/m
AArea10.3 in²6,645 mm²
x̄Centroid from back of web1.05 in26.7 mm
eoShear centre from web1.07 in27.2 mm
IxMoment of inertia, strong axis216 in⁴8,990.6 cm⁴
ZxPlastic modulus, strong axis43.2 in³707.9 cm³
SxSection modulus, strong axis36 in³589.9 cm³
rxRadius of gyration, strong axis4.59 in116.6 mm
IyMoment of inertia, weak axis12.6 in⁴524.5 cm⁴
ZyPlastic modulus, weak axis8.62 in³141.3 cm³
SySection modulus, weak axis4.64 in³76 cm³
ryRadius of gyration, weak axis1.11 in28.2 mm
JTorsional constant1.24 in⁴51.61 cm⁴
Metric designationMC310×52

Also known as

MC310×52

Channels of the same depth in the other series

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.