MC12×40 Channel Dimensions & Properties

C & MC Channels (AISC) · MC shapes: miscellaneous channels

MC12×40 is an AISC MC shapes: miscellaneous channels channel. It is 12 in (304.8 mm) deep with a 3.89 in (98.8 mm) flange, a 0.59 in (15.0 mm) web and an average flange thickness of 0.7 in (17.8 mm), and weighs 40 lb/ft (59.5 kg/m). Area 11.8 in² (7,613 mm²); centroid 1.04 in (26.4 mm) from the back of the web; Ix = 234 in⁴ (9,739.8 cm⁴), Sx = 39 in³ (639.1 cm³).

dDepth
304.8 mm12 in12 in304.8 mm
bfFlange width
98.8 mm3.89 in3.89 in98.8 mm
twWeb thickness
15.0 mm0.59 in0.59 in15.0 mm
tfFlange thickness (average)
17.8 mm0.7 in0.7 in17.8 mm

Drawing

98.8 mm3.89 in304.8 mm12 intf 17.8 mmtf 0.7 intw 15.0 mmtw 0.59 ine 26.4 mme 1.04 in
Flanges drawn parallel; MC flange slopes vary by shape.Drawn to scale · Dimensions in mmDimensions in inches

MC12×40 specifications

dDepth12 in304.8 mm
bfFlange width3.89 in98.8 mm
twWeb thickness0.59 in15.0 mm
tfFlange thickness (average)0.7 in17.8 mm
kDesign value1.31 in33.3 mm
kDetailing value1 5/16 in33.3 mm
WWeight40 lb/ft59.5 kg/m
AArea11.8 in²7,613 mm²
x̄Centroid from back of web1.04 in26.4 mm
eoShear centre from web0.952 in24.2 mm
IxMoment of inertia, strong axis234 in⁴9,739.8 cm⁴
ZxPlastic modulus, strong axis47.7 in³781.7 cm³
SxSection modulus, strong axis39 in³639.1 cm³
rxRadius of gyration, strong axis4.46 in113.3 mm
IyMoment of inertia, weak axis14.2 in⁴591 cm⁴
ZyPlastic modulus, weak axis9.31 in³152.6 cm³
SySection modulus, weak axis4.98 in³81.6 cm³
ryRadius of gyration, weak axis1.1 in27.9 mm
JTorsional constant1.69 in⁴70.34 cm⁴
Metric designationMC310×60

Also known as

MC310×60

Channels of the same depth in the other series

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.