MC13×31.8 Channel Dimensions & Properties

C & MC Channels (AISC) · MC shapes: miscellaneous channels

MC13×31.8 is an AISC MC shapes: miscellaneous channels channel. It is 13 in (330.2 mm) deep with a 4 in (101.6 mm) flange, a 0.375 in (9.5 mm) web and an average flange thickness of 0.61 in (15.5 mm), and weighs 31.8 lb/ft (47.3 kg/m). Area 9.35 in² (6,032 mm²); centroid 1 in (25.4 mm) from the back of the web; Ix = 239 in⁴ (9,947.9 cm⁴), Sx = 36.7 in³ (601.4 cm³).

dDepth
330.2 mm13 in13 in330.2 mm
bfFlange width
101.6 mm4 in4 in101.6 mm
twWeb thickness
9.5 mm0.375 in0.375 in9.5 mm
tfFlange thickness (average)
15.5 mm0.61 in0.61 in15.5 mm

Drawing

101.6 mm4 in330.2 mm13 intf 15.5 mmtf 0.61 intw 9.5 mmtw 0.375 ine 25.4 mme 1 in
Flanges drawn parallel; MC flange slopes vary by shape.Drawn to scale · Dimensions in mmDimensions in inches

MC13×31.8 specifications

dDepth13 in330.2 mm
bfFlange width4 in101.6 mm
twWeb thickness0.375 in9.5 mm
tfFlange thickness (average)0.61 in15.5 mm
kDesign value1.44 in36.6 mm
kDetailing value1 7/16 in36.5 mm
WWeight31.8 lb/ft47.3 kg/m
AArea9.35 in²6,032 mm²
x̄Centroid from back of web1 in25.4 mm
eoShear centre from web1.24 in31.5 mm
IxMoment of inertia, strong axis239 in⁴9,947.9 cm⁴
ZxPlastic modulus, strong axis43.4 in³711.2 cm³
SxSection modulus, strong axis36.7 in³601.4 cm³
rxRadius of gyration, strong axis5.05 in128.3 mm
IyMoment of inertia, weak axis11.4 in⁴474.5 cm⁴
ZyPlastic modulus, weak axis7.69 in³126 cm³
SySection modulus, weak axis3.79 in³62.1 cm³
ryRadius of gyration, weak axis1.1 in27.9 mm
JTorsional constant0.937 in⁴39 cm⁴
Metric designationMC330×47.3

Also known as

MC330×47.3

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.