MC12×50 Channel Dimensions & Properties

C & MC Channels (AISC) · MC shapes: miscellaneous channels

MC12×50 is an AISC MC shapes: miscellaneous channels channel. It is 12 in (304.8 mm) deep with a 4.14 in (105.2 mm) flange, a 0.835 in (21.2 mm) web and an average flange thickness of 0.7 in (17.8 mm), and weighs 50 lb/ft (74.4 kg/m). Area 14.7 in² (9,484 mm²); centroid 1.05 in (26.7 mm) from the back of the web; Ix = 269 in⁴ (11,196.6 cm⁴), Sx = 44.9 in³ (735.8 cm³).

dDepth
304.8 mm12 in12 in304.8 mm
bfFlange width
105.2 mm4.14 in4.14 in105.2 mm
twWeb thickness
21.2 mm0.835 in0.835 in21.2 mm
tfFlange thickness (average)
17.8 mm0.7 in0.7 in17.8 mm

Drawing

105.2 mm4.14 in304.8 mm12 intf 17.8 mmtf 0.7 intw 21.2 mmtw 0.835 ine 26.7 mme 1.05 in
Flanges drawn parallel; MC flange slopes vary by shape.Drawn to scale · Dimensions in mmDimensions in inches

MC12×50 specifications

dDepth12 in304.8 mm
bfFlange width4.14 in105.2 mm
twWeb thickness0.835 in21.2 mm
tfFlange thickness (average)0.7 in17.8 mm
kDesign value1.31 in33.3 mm
kDetailing value1 5/16 in33.3 mm
WWeight50 lb/ft74.4 kg/m
AArea14.7 in²9,484 mm²
x̄Centroid from back of web1.05 in26.7 mm
eoShear centre from web0.741 in18.8 mm
IxMoment of inertia, strong axis269 in⁴11,196.6 cm⁴
ZxPlastic modulus, strong axis56.5 in³925.9 cm³
SxSection modulus, strong axis44.9 in³735.8 cm³
rxRadius of gyration, strong axis4.28 in108.7 mm
IyMoment of inertia, weak axis17.4 in⁴724.2 cm⁴
ZyPlastic modulus, weak axis10.9 in³178.6 cm³
SySection modulus, weak axis5.64 in³92.4 cm³
ryRadius of gyration, weak axis1.09 in27.7 mm
JTorsional constant3.23 in⁴134.44 cm⁴
Metric designationMC310×74

Also known as

MC310×74

Channels of the same depth in the other series

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.